Potential All-in-One Single Board Computers

More
3 years 2 months ago #279184 by royka
@rodw Have you tried the kernel I had compiled for the s9xx? It seems like it uses the same kernel config for the s922x:
github.com/ophub/amlogic-s9xxx-armbian/


mega.nz/folder/qshRQAbR#0p25gwbiAXH41v2ZB6fZMg

Please Log in to join the conversation.

More
3 years 2 months ago #279362 by royka
UP-7000 Intel sbc with 40 pins header via IntelĀ® FPGA Altera Max V

up-board.org/up-7000/

Please Log in to join the conversation.

More
3 years 2 months ago #279415 by rodw
I'll hae a look thanks Royka

Please Log in to join the conversation.

More
3 years 1 month ago #279972 by nighteagle
Hello,
have use now a Optiplex 980 with i5 with 8GB RAM for 49 Bucks. Now Linuxcnc work fine. Latency is under 38.000 with 6 glxgears and Youtube for over 24h. No errors more with LinuxCNC... so a good alternative i think and with 49 Bucks cheaper than all other ideas.

Please Log in to join the conversation.

More
3 years 1 month ago #279977 by Cant do this anymore bye all
I have a Lenovo M72e tower that is good with a 4 core i5.
If want to use the on board parallel port you have to find a genuine Lenovo cable.......it's magic cable that enables the PPort and lets you change setting in the BIOS.

This I found BTSOTR when walking the dog.

Please Log in to join the conversation.

More
3 years 1 month ago #279982 by Bari
No link to the $49 used special PC sale?

Used and off-lease PC's are great when they are available.

Please Log in to join the conversation.

More
3 years 1 month ago #279988 by tommylight

No link to the $49 used special PC sale?

Used and off-lease PC's are great when they are available.
Probably end up in my country, just one of the local sellers has two big 40 ton trucks arriving here every week.

Please Log in to join the conversation.

More
3 years 1 month ago #280492 by Bari

Please Log in to join the conversation.

More
3 years 1 month ago #280611 by itsemast
I wonder if anyone compiled Linux with PREEMPT_RT for RISC-V CPU? Anyone got this hardware?

Please Log in to join the conversation.

Time to create page: 0.474 seconds
Powered by Kunena Forum