Axis Position Logger

partec
Offline
Elite Member

2 years 7 months ago #295965 by partec

Replied by partec on topic Axis Position Logger

Thanks, I haven't gotten that far yet, I'll take a look now

Please Log in to join the conversation.

partec
Offline
Elite Member

2 years 7 months ago #296027 by partec

Replied by partec on topic Axis Position Logger

looks fine, handling works so far, I'm currently studying which pieces of hal code might not have been set up for me yet? When I do manual logging, the little miracle disappears, why exactly?

motion.digital-in-NN IN BIT
These pins are used by M66 Pnn wait-for-input mode.
motion.digital-out-NN OUT BIT
These pins are controlled by the M62 through M65 words.

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 7 months ago #296028 by Aciera

Replied by Aciera on topic Axis Position Logger

The best approach would be to start your configuration from a terminal and check for errors while you test it.

The hal connections should be set up by the line you added to the [HAL] section of your ini file.

HALCMD = net logloop motion.digital-out-00 motion.digital-in-00

Please Log in to join the conversation.

partec
Offline
Elite Member

2 years 7 months ago #296031 by partec

Replied by partec on topic Axis Position Logger

the little miracle works perfectly, so well!

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 7 months ago #296033 by Aciera

Replied by Aciera on topic Axis Position Logger

I just tried it on a package installation and there I can reproduce the issue when trying to log with the default file_path. I'll come up with a fix in a bit.

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 7 months ago #296038 by Aciera

Replied by Aciera on topic Axis Position Logger

should be fixed now:
forum.linuxcnc.org/21-axis/30986-axis-po...gger?start=80#295964

Please Log in to join the conversation.

partec
Offline
Elite Member

2 years 7 months ago #296039 by partec

Replied by partec on topic Axis Position Logger

I'm constantly testing, it really hit me again, super exciting, thank you

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 7 months ago #296043 by Aciera

Replied by Aciera on topic Axis Position Logger

Another small fix for the Log Comment section reappearing on startup.

Please Log in to join the conversation.

partec
Offline
Elite Member

2 years 7 months ago #296052 by partec

Replied by partec on topic Axis Position Logger

in axis MDI M129 starts emclog.py and setup works fine so far
use emc-log with 'Manual Log' button seems fine already

my Cam-align button starts MDI_COMMAND=o<log>call and motion.digital-in-00 works now in Halshow

it would be fine to prepare now 'to start a single emc-log trig from this motion.digital-in-00' ?

Please Log in to join the conversation.

Aciera
Offline
Administrator

2 years 7 months ago #296053 by Aciera

Replied by Aciera on topic Axis Position Logger

it would be fine to prepare now 'to start a single emc-log trig from this motion.digital-in-00' ?

Should work. You will need to set up the digital-in LogTrigger in the Gui:

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.169 seconds