Axis 2 - touchscreen version of old friend

Maybe 5 axis with rtcp. My plan is to make one with 5 axes this year that would work on rpi5 + 7i96s + touch screen...otherwise I won't change it, although I've already forgotten how to insert the procedure exactly (which file where), but it looks perfect. Thank you.

Hello, can you make it fit for a 7-inch screen with a resolution of 800x480? I have a problem because only when I increase the resolution can I see everything in full screen, but it's very small.Thank you. masiwood@live.com

I will look at the config but that is actually a separate application
Did u try axis 2 on a small screen it should fit I think it removes a slider or 2 for convenience

I haven't tried it, I'll try it tonight, so I'll let you know, thanks a lot

zack sorry for the delay, I just tried it, but it's definitely not for small screens, not just axix2 but any, only for repetitive operations on machines where it's not that important....the letters in the preview are unreadable, the rest are large. thanks
 

We can enlarge those fonts but I think we are compressing too much info on such a small display
I have done a Aus where the touch screen was for control and a separate monitor like an old 15” was used for preview only
Ie dual screen one touch one display

So can do if u interested

I fully understand, I even tried to hook up a 32 inch external monitor without touch function, however it gives the image from rpi4 via mini hdmi, and regardless of the resolution of the large screen the numbers on the preview tab are still quite blurry, yes it would mean that we try. thanks