[SOLVED] How to change the view of the axes in AXIS?

-where are the home switches located?
In the left back corner

-what cam are you using?
flatCam

-is this a normal cartesian machine?
Yes, is a CNC3040.. ZYX axis
CNC3040

-does it have limit switches at both ends of the axis?
no, only in the back left corner

It doesn't work well for me, it works inverted, in the axis software the spindle moves in one direction and in the machine it goes in the opposite direction on the Y axis.
the problem is that the 0 point of the machine is by default at the bottom left


 

Just set the HOME = in the ini file to maximum travel Y axis can do. Only for the Y axis/joint.

My friend... the problem it's fixed


The problem was in the configure the switches

 

At now work fine....




Thanks you so much

You are welcomed, always.