New component for keyboards and panels.

Hi
Thank you for reply  ,Aciera  tommylight  COFHAL
Today I test
MODE="XXXX"      this xxx, by below
0660
0666
777
0777
all chmod will remove permission after reboot PC

forum.linuxcnc.org/24-hal-components/415...nels?start=90#300763

MR.MarkoPolo  can you explain and step by step for setup this ?, I want to try , sorry I poor linux program.

Thank you.

try this:

sudo nano /etc/cron.d/uinput

complete the file with the content: @reboot root chmod 666 /dev/uinput
(at the end of the line press etner to end the line)

save the file and exit
reboot

MarkoPolo wrote:

try this:

sudo nano /etc/cron.d/uinput

complete the file with the content: @reboot root chmod 666 /dev/uinput
(at the end of the line press etner to end the line)

save the file and exit
reboot

AWSOME !
This work !!!
Thank you, MR.MarkoPolo

I'm glad it works.
this is an even simpler version if anyone needs something similar. Just paste into the console and enter the password.

echo "@reboot root chmod 666 /dev/uinput" |sudo tee /etc/cron.d/uinput