1982 Matsuura MC-500v Retrofit

More
9 years 9 months ago #86009 by tommylight
Replied by tommylight on topic 1982 Matsuura MC-500v Retrofit
Had to wait over a month to get my stuff from portugal to austria to kosovo.
Teleportation=niceeeee=gona be missused the seconds it works !!!

Please Log in to join the conversation.

More
9 years 9 months ago #86028 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
Very true...lol

Please Log in to join the conversation.

More
9 years 9 months ago #86335 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
Mesa boards have arrived!!! Crazy how all these big boards are coming out and this little package is gonna go in. Also that the Mesa setup will be 10x the system that is in there now.

Attachment not found



Start gutting tomorrow! I will post pictures with the progress.

Please Log in to join the conversation.

More
9 years 9 months ago #86440 by andypugh
Replied by andypugh on topic 1982 Matsuura MC-500v Retrofit
I fitted PC + Mesa cards in the volume vacated by one rectifier on my lathe.

Please Log in to join the conversation.

More
9 years 9 months ago #86447 by skunkworks
Replied by skunkworks on topic 1982 Matsuura MC-500v Retrofit
vfd side - door
[img


VFD

[img


Servo drives side

[img


Servo drives side - door

[img


and they are all rotated... if you follow the links they are the right orientation...

Please Log in to join the conversation.

More
9 years 9 months ago #86451 by bevins
Replied by bevins on topic 1982 Matsuura MC-500v Retrofit
Skunkworks, are those opto22 boards? If so whats the model numbers?

Is there a mesa board rs422 that can connect to 7i77 and then 50 pin ribbon cable to connect to opto22?

Please Log in to join the conversation.

More
9 years 9 months ago #86452 by skunkworks
Replied by skunkworks on topic 1982 Matsuura MC-500v Retrofit
the 7i69

store.mesanet.com/index.php?route=produc...69_70&product_id=113

sam

Please Log in to join the conversation.

More
9 years 9 months ago #86454 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
Looking good..... I started on gutting the drive side. Need to track a few more wires so I can gut the rest. Figure I would get servos, encoders, and limits hooked up first then track down the spindle. After that start on the tool changer.

Attachment not found



Trying to decide if I need this unit or not.

Attachment not found



Jeremy

Please Log in to join the conversation.

More
9 years 9 months ago #86457 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
@ andypugh ..... Must have been one big rectifier on that thing.

Please Log in to join the conversation.

More
9 years 9 months ago #86468 by andypugh
Replied by andypugh on topic 1982 Matsuura MC-500v Retrofit

chopper79 wrote: @ andypugh ..... Must have been one big rectifier on that thing.


Three-phase selenium rectifier:
Before: goo.gl/photos/FmRhVhHtMu2fNDPV7
After: goo.gl/photos/bKC7sBKifRrj4Dq6A

Please Log in to join the conversation.

Time to create page: 0.742 seconds
Powered by Kunena Forum