Cam program for lathe

I have recently finished retrofitting a Mazak qt20 lathe with Linuxcnc and I am looking for a good cam program to use with it. I have tried Mastercam ,but I cant find a post processor that works with Linuxcnc for lathes . The one on the wiki seems to only work for milling machines .Does anyone know how to get Mastercam to work ,or is there another program that works well with Linuxcnc ? Thanks 

There should be a simple CAM included with LinuxCNC made by AndyPugh, have a look here as this is the latest topic discussing this
forum.linuxcnc.org/26-turning/41498-scha...fit?start=510#274844
The last post contains a link to the solution, in case you also bump into the issue of play button being hidden.
-
I have yet to play with this as i am still waiting for some good cable for the encoders i mounted on my Mazak, and i do not have the hydraulic chuck, so waiting ....

i have a working post processor for Fusion360 autodesk, if you want it I'l attach it when i get home, worst case you can send it to mastercam and have them import that setup

Thanks for the help.

Autodesk Cam has an up to date Linuxcnc turning post that seems to be working well. I think it also works with Fusion 360 and HSMWORKS. Its available to download on their website.

you'll need to change your startup environment gcode in your ini file for diameter mode.

the g28 code handling for toolchanges is wrong

lmk if you want my post

smc.collins wrote:

you'll need to change your startup environment gcode in your ini file for diameter mode.

the g28 code handling for toolchanges is wrong

lmk if you want my post

Yes, please on the F360 post.

here you go 

with this post processor

park the carriage where you want the toolchange to occur, then call g28.1 in the mdi, that will set the machine absolute co-ordinates. then the post will call g28 and take the carriage to the g28 location for tool changes.