XHC-WHB04B-6 LinuxCNC not working

More
7 years 8 months ago #125487 by nonkeldw
Replied by nonkeldw on topic XHC-WHB04B-6 LinuxCNC not working
Hello
Thanks, the machine is now reacting on the pendant. But the scale is not yet correct interpreted. The scale stay on 2, it is not changing with the button. When I run the code in debug mode the driver reacts on the change... but there is no change in LinuxCNC

Please Log in to join the conversation.

More
7 years 8 months ago #126335 by andypugh
Replied by andypugh on topic XHC-WHB04B-6 LinuxCNC not working
This sounds like a HAL connection problem to the jog scale inputs

Please Log in to join the conversation.

More
7 years 4 months ago #137312 by marcobc
Replied by marcobc on topic XHC-WHB04B-6 LinuxCNC not working
can you please share binary file? thank you.

Please Log in to join the conversation.

More
7 years 1 month ago #144264 by Talla
Replied by Talla on topic XHC-WHB04B-6 LinuxCNC not working
Hello,

I have Debian 9 and LinuxCNC 2.8.

How can I easily install the XHC-WHB04B-6 driver?

Greetings Peter

Please Log in to join the conversation.

More
7 years 1 month ago #144289 by andypugh
Replied by andypugh on topic XHC-WHB04B-6 LinuxCNC not working
If you have LinuxCNC then you probably already have the driver:
linuxcnc.org/docs/2.8/html/man/man1/xhc-hb04.1.html

Please Log in to join the conversation.

More
7 years 1 month ago #144385 by Talla
Replied by Talla on topic XHC-WHB04B-6 LinuxCNC not working
So I tried, but it does not connect.
The ID is 10ce:eb93 and not as specified 10ce:eb70.
What can I do ?

Please Log in to join the conversation.

More
7 years 1 month ago #144386 by andypugh
Replied by andypugh on topic XHC-WHB04B-6 LinuxCNC not working
You could try recompiling
github.com/LinuxCNC/linuxcnc/blob/master...mps/xhc-hb04.cc#L822

There may be useful ideas in this discussion:
bbs.archlinux.org/viewtopic.php?id=204964

Please Log in to join the conversation.

More
7 years 1 month ago #144387 by andypugh
Replied by andypugh on topic XHC-WHB04B-6 LinuxCNC not working
A search for "eb93" on this forum found:
forum.linuxcnc.org/24-hal-components/361...hon-component#143708

Please Log in to join the conversation.

More
7 years 1 month ago #144389 by Talla
Replied by Talla on topic XHC-WHB04B-6 LinuxCNC not working
Thank you

How can I recompile the driver only?
Is there a manual?
Unfortunately I am not so fit in terms of Linux.

I would like to try .... but how ?

github.com/ctbenergy/linuxcnc/blob/2.7-f...04b-6/xhc-whb04b6.cc

Please Log in to join the conversation.

More
7 years 1 month ago #144506 by Talla
Replied by Talla on topic XHC-WHB04B-6 LinuxCNC not working
Hi
I compiled the driver to LinuxCNC 2.9. There are still some bugs but I am confident.



Thanks, Greetings Peter

Please Log in to join the conversation.

Time to create page: 0.121 seconds
Powered by Kunena Forum