Reverse run not working in linuxcnc-plasmac github

hii Guys ..
i compiled reverse run master on github named linuxcnc-plasmac ] but reverse run function not working in axis or gmoccapy
after pausing program rev and fwd buttons opens but doesnt do anything
do i need to make hal connectons in order for them to function but i dont know whether there is rverse run component in hal or not

Hi
as Rod saying it is Current not finished
it is experimental and not reedy to use in full Service on a real machine

it will be fixed within some days

but in youtube video it seems to work

it is experimental and not reedy to use in full Service on a real machine

Huh. Where did you get this info?

github.com/grotius-cnc/stable

Above has it all. You only have to copy the plasmac stuff into it and your are master kenobi.

it will be fixed within some days
I am waiting about 2 years now. It take's a git programmer about 4- 8 hours. But he programmer needs to stay superfocused at the code !!
But i have done it, so don't worry. And it works, and it is only for professional usage !! It has the latest stable release !!

Picked up from the Developers email group that it is proposed to release the current master branch soon (days not weeks hopefully), then merge reverse run into the new master (call it v 2.9 for now) So give it a bit of time and it should at least be in the main stream.

sir do i need to make that again when you update it ??
i ve seen it working on youtube then why it isnt working now

Grotius wrote: it is experimental and not reedy to use in full Service on a real machine

Huh. Where did you get this info?

github.com/grotius-cnc/stable

Above has it all. You only have to copy the plasmac stuff into it and your are master kenobi.

it will be fixed within some days
I am waiting about 2 years now. It take's a git programmer about 4- 8 hours. But he programmer needs to stay superfocused at the code !!
But i have done it, so don't worry. And it works, and it is only for professional usage !! It has the latest stable release !!

it doesnt have reverse run
i build it and whenever i try to start a configration it says liinux cnc is terminated with an error

rodw wrote: Picked up from the Developers email group that it is proposed to release the current master branch soon (days not weeks hopefully), then merge reverse run into the new master (call it v 2.9 for now) So give it a bit of time and it should at least be in the main stream.

2.8 release will be weeks rather than days as we squash the remaining bugs.
But as soon as 2.8 is branched out of master then it will be possibly to merge reverse-run (because, at that point, breaking master is OK again...) and that will be days rather than weeks.

Is there any way i can make reverse run work...???

you can fix the errors andy is taking about yourself
best is to wait the remaining 2weeks till the stuff is over the remaining errors you are facing

As i myself need to update around 25 mashines Gantry and wait for the officel release

You can as You got a GIT
daily pull and make it