Reverse run not working in linuxcnc-plasmac github

7 years 4 months ago #136416 by tommylight

Replied by tommylight on topic Reverse run not working in linuxcnc-plasmac github

Sorry, wrong thread.

Please Log in to join the conversation.

7 years 3 months ago #139079 by phoenix

Replied by phoenix on topic Reverse run not working in linuxcnc-plasmac github

why i cant find linuxcnc plasmac on github

Please Log in to join the conversation.

7 years 3 months ago #139081 by phillc54

Replied by phillc54 on topic Reverse run not working in linuxcnc-plasmac github

It is now in LinuxCNC 2.8 and master (2.9)

github.com/LinuxCNC/linuxcnc

Please Log in to join the conversation.

Time to create page: 0.074 seconds