linix cnc recrofiting

i have a cnc milling machine to recrofit , this machine with ac analog servo with 5v encoders

but problem is x drive is not working then i buy new drive and motor that drive is only working with puls and dircction mode

my machine has

x drive digital servo (step and direction )
y drive analog servo(with 5v encoder)
z drive anlog servo( with 5v encoder)

spindle
mpg

i planing tool change also


what are the sutabale mesa card for my machine

kavindu1 wrote: i have a cnc milling machine to recrofit , this machine with ac analog servo with 5v encoders

but problem is x drive is not working then i buy new drive and motor that drive is only working with puls and dircction mode

my machine has

x drive digital servo (step and direction )
y drive analog servo(with 5v enco
der)
z drive anlog servo( with 5v encoder)

spindle
mpg

i planing tool change also


what are the sutabale mesa card for my machine

5i25 or 7i92M, with 7i77 and 7i78.

That gives you 6 servo with encoder ports and 4 step and direction. plus you'll have two spindle with encoders.

I don't know if that is the most cost effective, but that's what I would use. Pretty robust.

i deside to order 7i92 +7i77+7i78 but i have small problem

7i92_7i77x2D is this firmware match with 7i92+7i77+7i78

and also in pin copiger 7i92_7i77x2D firmware is not showing

how can i make it visible

7i92 ethernet එකක් දාන්න
Mesa board eka ටිකක් ගණන්

you may ask PCW direct
for a better bitfile

the 7i92 is the same as 5i25 so you can use pncconf to get a base config
but you can also get lots of base here on forum as may using them
i got no servos i use only steppers

@kavindu1

This is the third topic you started with the same title and pretty much same contents and the same errors in the title.
Please stop doing that, it gets confusing.
Here are the links to the other 2 topics

forum.linuxcnc.org/38-general-linuxcnc-q...inix-cnc-recrofiting

forum.linuxcnc.org/38-general-linuxcnc-q...inix-cnc-recrofiting

kavindu1
ඔබ බුකිය හෝ වසැප් ඉන්නවා ද ?

ow bukiye innawa

kavindu anushka