New Project with Mesa 7I96 and THCAD-05

More
5 years 4 months ago #210949 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
/usr/bin/linuxcnc ‘/home/card/linuxcnc/configs/last cnc/last cnc.ini

Please Log in to join the conversation.

More
5 years 4 months ago #210950 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
OK, so it is a package installation.

do you update by going to a terminal and entering:
Code:
sudo apt update sudo apt dist-upgrade

Please Log in to join the conversation.

More
5 years 4 months ago #210951 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
Yes I had done that and it took a while to upgrade and completed.

Please Log in to join the conversation.

More
5 years 4 months ago #210952 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
It may be worthwhile going to the following page and follow the procedure shown, it should get you to V0.191

buildbot.linuxcnc.org/

Assuming you are using Debian Buster or equivalent, use these stanzas:
Code:
deb http://buildbot.linuxcnc.org/ buster master-rtpreempt deb-src http://buildbot.linuxcnc.org/ buster master-rtpreempt

Please Log in to join the conversation.

More
5 years 4 months ago #210953 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
Trying again
Gave me this when entering
Sudo apt update
All packages are up to date
Failed to fetch deb.Debian.org/debian/dists/buster/inrelease
Some index files failed to download they have been ignored or old ones used instead

Please Log in to join the conversation.

More
5 years 4 months ago #210954 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
So what do I need to do again I am not following?

Please Log in to join the conversation.

More
5 years 4 months ago #210955 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
Follow these procedures on tha page I linked to:
  • Getting the archive signing key
  • Adding the buildbot packages
  • Installing LinuxCNC

    • You should end up with something like this in Synaptic Package Manager:
    Warning: Spoiler!

    Please Log in to join the conversation.

    More
    5 years 4 months ago #210957 by TexasCNC
    Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
    Not giving the files on the repository

    Please Log in to join the conversation.

    More
    5 years 4 months ago #210958 by TexasCNC
    Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

    Attachment not found

    Please Log in to join the conversation.

    More
    5 years 4 months ago #210959 by phillc54
    Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
    These need to be just:
    Code:
    master-rtpreempt

    Attachment not found

    Please Log in to join the conversation.

    Time to create page: 0.153 seconds
    Powered by Kunena Forum