7i76e -> 7i74 -> (7i72 + 7i87)

Hello

I'd like to use the 7i76e with 7i74 on expansion port 0, then the 7i72 and 7i87 boards connected with cat 6 to the 7i74 ports 0 and 1.

Can I use bitfile 7i76e_7i76x1_7i74x1D.bit for this and  ?

I referenced these posts but am quite new at this yet:
7i76E & 7i74
Mesa 7i74 support with 7i76e?
7i76E - 7I74 - 7i73 firmware

Thanks!
Finn

That should work, just check on what header to connect the 7i74 as there are two IDC26 headers on the 7i76E.