PNCconf 7i92H and 7i76

cnc@cnc:~$ ping 10.10.10.10 PING 10.10.10.10 (10.10.10.10) 56(84) bytes of data. 64 bytes from 10.10.10.10: icmp_seq=1 ttl=64 time=0.192 ms 64 bytes from 10.10.10.10: icmp_seq=2 ttl=64 time=0.133 ms 64 bytes from 10.10.10.10: icmp_seq=3 ttl=64 time=0.125 ms ^C --- 10.10.10.10 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2056ms rtt min/avg/max/mdev = 0.125/0.150/0.192/0.029 ms cnc@cnc:~$ ping 10.10.10.11 PING 10.10.10.11 (10.10.10.11) 56(84) bytes of data. 64 bytes from 10.10.10.11: icmp_seq=1 ttl=64 time=0.026 ms 64 bytes from 10.10.10.11: icmp_seq=2 ttl=64 time=0.060 ms 64 bytes from 10.10.10.11: icmp_seq=3 ttl=64 time=0.060 ms 64 bytes from 10.10.10.11: icmp_seq=4 ttl=64 time=0.064 ms ^C --- 10.10.10.11 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3057ms rtt min/avg/max/mdev = 0.026/0.052/0.064/0.015 ms cnc@cnc:~$ sudo mesaflash --device 7i92 --addr 10.10.10.10 --readhmid [sudo] Passwort für cnc: Configuration Name: HOSTMOT2 General configuration information:   BoardName : MESA7I92   FPGA Size: 9 KGates   FPGA Pins: 144   Number of IO Ports: 2   Width of one I/O port: 17   Clock Low frequency: 100.0000 MHz   Clock High frequency: 200.0000 MHz   IDROM Type: 3   Instance Stride 0: 4   Instance Stride 1: 64   Register Stride 0: 256   Register Stride 1: 256 Modules in configuration:   Module: DPLL   There are 1 of DPLL in configuration   Version: 0   Registers: 7   BaseAddress: 7000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: WatchDog   There are 1 of WatchDog in configuration   Version: 0   Registers: 3   BaseAddress: 0C00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: IOPort   There are 2 of IOPort in configuration   Version: 0   Registers: 5   BaseAddress: 1000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: QCount   There are 2 of QCount in configuration   Version: 2   Registers: 5   BaseAddress: 3000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: SSerial   There are 1 of SSerial in configuration   Version: 0   Registers: 6   BaseAddress: 5B00   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 64 bytes   Module: StepGen   There are 10 of StepGen in configuration   Version: 2   Registers: 10   BaseAddress: 2000   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes   Module: LED   There are 1 of LED in configuration   Version: 0   Registers: 1   BaseAddress: 0200   ClockFrequency: 100.000 MHz   Register Stride: 256 bytes   Instance Stride: 4 bytes Configuration pin-out: IO Connections for P2 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                      0   IOPort       StepGen          0        Dir/Table2      (Out) 14                      1   IOPort       StepGen          0        Step/Table1     (Out)  2                      2   IOPort       StepGen          1        Dir/Table2      (Out) 15                      3   IOPort       StepGen          1        Step/Table1     (Out)  3                      4   IOPort       StepGen          2        Dir/Table2      (Out) 16                      5   IOPort       StepGen          2        Step/Table1     (Out)  4                      6   IOPort       StepGen          3        Dir/Table2      (Out) 17                      7   IOPort       StepGen          3        Step/Table1     (Out)  5                      8   IOPort       StepGen          4        Dir/Table2      (Out)  6                      9   IOPort       StepGen          4        Step/Table1     (Out)  7                     10   IOPort       SSerial          0        TXData0         (Out)  8                     11   IOPort       SSerial          0        RXData0         (In)  9                     12   IOPort       SSerial          0        TXData1         (Out) 10                     13   IOPort       SSerial          0        RXData1         (In) 11                     14   IOPort       QCount           0        Quad-IDX        (In) 12                     15   IOPort       QCount           0        Quad-B          (In) 13                     16   IOPort       QCount           0        Quad-A          (In) IO Connections for P1 DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir  1                     17   IOPort       StepGen          5        Dir/Table2      (Out) 14                     18   IOPort       StepGen          5        Step/Table1     (Out)  2                     19   IOPort       StepGen          6        Dir/Table2      (Out) 15                     20   IOPort       StepGen          6        Step/Table1     (Out)  3                     21   IOPort       StepGen          7        Dir/Table2      (Out) 16                     22   IOPort       StepGen          7        Step/Table1     (Out)  4                     23   IOPort       StepGen          8        Dir/Table2      (Out) 17                     24   IOPort       StepGen          8        Step/Table1     (Out)  5                     25   IOPort       StepGen          9        Dir/Table2      (Out)  6                     26   IOPort       StepGen          9        Step/Table1     (Out)  7                     27   IOPort       SSerial          0        TXData2         (Out)  8                     28   IOPort       SSerial          0        RXData2         (In)  9                     29   IOPort       SSerial          0        TXData3         (Out) 10                     30   IOPort       SSerial          0        RXData3         (In) 11                     31   IOPort       QCount           1        Quad-IDX        (In) 12                     32   IOPort       QCount           1        Quad-B          (In) 13                     33   IOPort       QCount           1        Quad-A          (In)