Basic Configuration 1230 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
Solving Reversed Spindle Speed: HAL Inversion for PWM-to-Analog (Pi5, hal_gpio) Category: Basic Configuration Topic started 1 year 4 months ago, by LucDav Last Post 1 year 4 months ago by PCW	Replies:2 Views:1393	Last Post by PCW 1 year 4 months ago
M6 shuts off spindle, but no UI confirmation, and program doesn't pause Category: Basic Configuration Topic started 1 year 4 months ago, by pgf Last Post 1 year 4 months ago by andypugh	Replies:8 Views:1139	Last Post by andypugh 1 year 4 months ago
Probe tripped during non-probe move Category: Basic Configuration Topic started 1 year 5 months ago, by mc_cubus Last Post 1 year 4 months ago by andypugh	Replies:4 Views:1748	Last Post by andypugh 1 year 4 months ago
Reposition Preview grid. Category: Basic Configuration Topic started 1 year 4 months ago, by TheTinkeringMechanic1 Last Post 1 year 4 months ago by TheTinkeringMechanic1	Replies:6 Views:779	Last Post by TheTinkeringMechanic1 1 year 4 months ago
AC Servo tuning - Joint 0 following error at high velocities Category: Basic Configuration Topic started 1 year 6 months ago, by abi9624 Last Post 1 year 4 months ago by abi9624 1 2	Replies:12 Views:3929	Last Post by abi9624 1 year 4 months ago
Noob looking for help - after homing Z axis is still running into limit switches Category: Basic Configuration Topic started 1 year 4 months ago, by Geshka Last Post 1 year 4 months ago by tommylight	Replies:3 Views:1076	Last Post by tommylight 1 year 4 months ago
Spindle speed oscillation, but not hunting Category: Basic Configuration Topic started 1 year 4 months ago, by Fianna Last Post 1 year 4 months ago by PCW	Replies:1 Views:1135	Last Post by PCW 1 year 4 months ago
speed not increasing Category: Basic Configuration Topic started 1 year 4 months ago, by mehdidadash Last Post 1 year 4 months ago by mehdidadash	Replies:1 Views:814	Last Post by mehdidadash 1 year 4 months ago
CNC lathe to grinder. Category: Basic Configuration Topic started 1 year 4 months ago, by TheTinkeringMechanic1 Last Post 1 year 4 months ago by TheTinkeringMechanic1 1 2	Replies:11 Views:2297	Last Post by TheTinkeringMechanic1 1 year 4 months ago
Index homing Heidenhain ls 403/exe602 Category: Basic Configuration Topic started 1 year 5 months ago, by H-S-W Last Post 1 year 4 months ago by PCW 1 2 3	Replies:23 Views:4536	Last Post by PCW 1 year 4 months ago
Servo Oscillation Issue at ±6.6V 5i25 + 7i77, Analog Control Category: Basic Configuration Topic started 1 year 8 months ago, by Traken Last Post 1 year 4 months ago by Traken 1 2 3	Replies:22 Views:3790	Last Post by Traken 1 year 4 months ago
Servo tuning Step/Dir Category: Basic Configuration Topic started 1 year 4 months ago, by Sternfox Last Post 1 year 4 months ago by PCW	Replies:1 Views:959	Last Post by PCW 1 year 4 months ago
Loading different configurations during startup. Category: Basic Configuration Topic started 1 year 5 months ago, by User_paulvdh_42 Last Post 1 year 5 months ago by Aciera	Replies:3 Views:1531	Last Post by Aciera 1 year 5 months ago
Protecting My Mesa 7i76EU: Wiring Questions for Home Sensors and Touch Probe Category: Basic Configuration Topic started 1 year 5 months ago, by npostma Last Post 1 year 5 months ago by npostma 1 2	Replies:14 Views:4766	Last Post by npostma 1 year 5 months ago
Servo as spindle motor configuration Category: Basic Configuration Topic started 1 year 5 months ago, by DavidR8 Last Post 1 year 5 months ago by DavidR8	Replies:2 Views:1439	Last Post by DavidR8 1 year 5 months ago
The numpty needs help Category: Basic Configuration Topic started 1 year 5 months ago, by jonsar Last Post 1 year 5 months ago by tommylight	Replies:1 Views:729	Last Post by tommylight 1 year 5 months ago
Actual position and Commanded position differ, using cia402 [SOLVED] Category: Basic Configuration Topic started 1 year 5 months ago, by low-blip Last Post 1 year 5 months ago by low-blip 1 2	Replies:14 Views:5625	Last Post by low-blip 1 year 5 months ago
absolute encoders with dual axis Category: Basic Configuration Topic started 2 years 6 months ago, by zmrdko Last Post 1 year 5 months ago by aluplastvz	Replies:6 Views:1780	Last Post by aluplastvz 1 year 5 months ago
Effect of lengthening the servo thread period? Category: Basic Configuration Topic started 1 year 5 months ago, by pgf Last Post 1 year 5 months ago by pgf	Replies:9 Views:2630	Last Post by pgf 1 year 5 months ago
Need guidence to improve latency and speed Category: Basic Configuration Topic started 1 year 5 months ago, by npostma Last Post 1 year 5 months ago by PCW 1 2	Replies:11 Views:5173	Last Post by PCW 1 year 5 months ago

Time to create page: 0.064 seconds