Install Linuxcnc to ubuntu 16.04 LTS 64 bit

Guys , I'm very beginner of linux. I want to install linuxCNC to my Ubuntu 16.04 LTS 64bit. I searched everywhere but i couldnt find any complete tutorials to do this. Is it possible to inslall linuxCNC to Ubuntu 16.4 ? can anuone give me a complete tutorial ?
thank you.

Since Linux Mint 18.1 and Ubuntu 16.04 use the same packages (more or less) you can follow this thread.

forum.linuxcnc.org/9-installing-linuxcnc...h-rip-install-or-deb

There is also this thread
forum.linuxcnc.org/9-installing-linuxcnc...rnel?start=40#109315

There is also this thread
forum.linuxcnc.org/9-installing-linuxcnc...4-4-and-linuxcnc-2-7

All of which should have been found by the search function or browsing through here
forum.linuxcnc.org/9-installing-linuxcnc

i tried to follow the first guide.
but i got this error
--2018-05-03 11:45:14-- ftp://ftp.kernel.org/pub/linux/kernel/v4.x/linux-4.8.11.tar.xz
=> ‘linux-4.8.11.tar.xz’
Resolving ftp.kernel.org (ftp.kernel.org)... failed: Name or service not known.
wget: unable to resolve host address ‘ftp.kernel.org’

can you help me ?

The ftp servers no longer exist
www.kernel.org/shutting-down-ftp-services.html

Just use www.kernel.org instead.

I know that you are asking for ubuntu.
If you want to try debian, just download and install the latest, debian in www.linuxcnc.org/testing-stretch-rtpreempt/
(note: It is experimental, but I am running a older version at about one year on a daily use machine without major errors)
This version have most of things working out of the box like ubuntu.

I just did (right now on a new setup), and without any tweek, mods, drivers, bios changes, anything I got the attachment...
It is a 30 min job.

Update: While downloading and installing packages I got a worst latency, but still a good one:

1ms: 20124
25us: 15384