Problem parralel Port is not reconized in stretch configuration

More
7 years 5 months ago #135125 by Philippe
Problem parralel Port is not reconized in stretch configuration was created by Philippe
Hello all,
i make the migration wheezy to stretch and I dont have the parralel port.
i test with the 32 and 64 bits solution and is the same , no parralel port.

thanx for your repplies

Philippe

Please Log in to join the conversation.

More
7 years 5 months ago #135126 by pl7i92
Replied by pl7i92 on topic Problem parralel Port is not reconized in stretch configuration
Please check the Bios
after you maybe deletet the partition and reinstalled the system

what does
dmesg | grep parpo*
output

Please Log in to join the conversation.

More
7 years 5 months ago #135129 by Philippe
Replied by Philippe on topic Problem parralel Port is not reconized in stretch configuration
For me the parralel card is ok on the bios because I've dual boot on my PC and the parallel port work well with Mach3, so no problem on Hardware

Philippe

Please Log in to join the conversation.

More
7 years 5 months ago #135135 by pl7i92
Replied by pl7i92 on topic Problem parralel Port is not reconized in stretch configuration
what does the Terminal info provide
PLEASE Check
dmesg | grep parpo*
[ 8.534950] parport_pc 00:01: reported by Plug and Play ACPI
[ 8.535023] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.636217] lp0: using parport0 (interrupt-driven).

Please Log in to join the conversation.

More
7 years 5 months ago #135156 by Philippe
Replied by Philippe on topic Problem parralel Port is not reconized in stretch configuration
I'm sorry but i don't understand what do you say.
how i check your request, i'm not an informatician.

philippe

Please Log in to join the conversation.

More
7 years 5 months ago #135157 by Todd Zuercher
Replied by Todd Zuercher on topic Problem parralel Port is not reconized in stretch configuration
What kind of parallel port do you have? Is it an add in card, PCI, PCIe, something else?

Please Log in to join the conversation.

More
7 years 5 months ago #135169 by bevins
Replied by bevins on topic Problem parralel Port is not reconized in stretch configuration

Philippe wrote: I'm sorry but i don't understand what do you say.
how i check your request, i'm not an informatician.

philippe


He means open a terminal and type: dmesg | grep parpo*

Paste the results here.

Please Log in to join the conversation.

More
7 years 5 months ago #135177 by Philippe
Replied by Philippe on topic Problem parralel Port is not reconized in stretch configuration
yes is an add card in PCI port

Please Log in to join the conversation.

More
7 years 5 months ago #135179 by PCW
Replied by PCW on topic Problem parralel Port is not reconized in stretch configuration
If its an add-in card, what did you use for the parallel port address in your hal or ini file?

Please Log in to join the conversation.

More
7 years 5 months ago #135299 by Philippe
Replied by Philippe on topic Problem parralel Port is not reconized in stretch configuration
When i put dmesg | grep parpo* in the terminal noting appends

Please Log in to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum