Problem parralel Port is not reconized in stretch configuration

Ok, so what is the solution ?

There might not actually be a problem.

Try this, and show us the results.

see after

pilou@PilouCnc:~$ halrun
halcmd: loadrt hal_parport cfg="0xEC00 in"
Note: Using POSIX realtime
config string '0xEC00 in'
Linux parallel port @60416 not found
halcmd: loadrt threads
halcmd: addf parport.0 thread1
HAL: ERROR: function 'parport.0' not found
<stdin>: addf failed
halcmd: start
halcmd: show pin
Component Pins:
Owner Type Dir Value Name
6 bit IN FALSE parport.0.pin-01-out
6 bit OUT FALSE parport.0.pin-02-in
6 bit OUT FALSE parport.0.pin-02-in-not
6 bit OUT FALSE parport.0.pin-03-in
6 bit OUT FALSE parport.0.pin-03-in-not
6 bit OUT FALSE parport.0.pin-04-in
6 bit OUT FALSE parport.0.pin-04-in-not
6 bit OUT FALSE parport.0.pin-05-in
6 bit OUT FALSE parport.0.pin-05-in-not
6 bit OUT FALSE parport.0.pin-06-in
6 bit OUT FALSE parport.0.pin-06-in-not
6 bit OUT FALSE parport.0.pin-07-in
6 bit OUT FALSE parport.0.pin-07-in-not
6 bit OUT FALSE parport.0.pin-08-in
6 bit OUT FALSE parport.0.pin-08-in-not
6 bit OUT FALSE parport.0.pin-09-in
6 bit OUT FALSE parport.0.pin-09-in-not
6 bit OUT FALSE parport.0.pin-10-in
6 bit OUT FALSE parport.0.pin-10-in-not
6 bit OUT FALSE parport.0.pin-11-in
6 bit OUT FALSE parport.0.pin-11-in-not
6 bit OUT FALSE parport.0.pin-12-in
6 bit OUT FALSE parport.0.pin-12-in-not
6 bit OUT FALSE parport.0.pin-13-in
6 bit OUT FALSE parport.0.pin-13-in-not
6 bit IN FALSE parport.0.pin-14-out
6 bit OUT FALSE parport.0.pin-15-in
6 bit OUT FALSE parport.0.pin-15-in-not
6 bit IN FALSE parport.0.pin-16-out
6 bit IN FALSE parport.0.pin-17-out
6 s32 OUT 0 parport.0.read.time
6 s32 OUT 0 parport.0.reset.time
6 s32 OUT 0 parport.0.write.time
6 s32 OUT 0 parport.read-all.time
6 s32 OUT 0 parport.write-all.time
10 s32 OUT 0 thread1.time

halcmd: Note: Using POSIX realtime

Sorry, I should have said "parport.0.read"

See after
pilou@PilouCnc:~$ halrun
halcmd: loadrt hal_parport cfg="0xEC00 in"
Note: Using POSIX realtime
config string '0xEC00 in'
Linux parallel port @60416 not found
halcmd: loadrt threads
halcmd: addf parport.0.read
<stdin>: addf requires at least 2 arguments, 1 given
halcmd: start
halcmd: show pin
Component Pins:
Owner Type Dir Value Name
6 bit IN FALSE parport.0.pin-01-out
6 bit OUT FALSE parport.0.pin-02-in
6 bit OUT FALSE parport.0.pin-02-in-not
6 bit OUT FALSE parport.0.pin-03-in
6 bit OUT FALSE parport.0.pin-03-in-not
6 bit OUT FALSE parport.0.pin-04-in
6 bit OUT FALSE parport.0.pin-04-in-not
6 bit OUT FALSE parport.0.pin-05-in
6 bit OUT FALSE parport.0.pin-05-in-not
6 bit OUT FALSE parport.0.pin-06-in
6 bit OUT FALSE parport.0.pin-06-in-not
6 bit OUT FALSE parport.0.pin-07-in
6 bit OUT FALSE parport.0.pin-07-in-not
6 bit OUT FALSE parport.0.pin-08-in
6 bit OUT FALSE parport.0.pin-08-in-not
6 bit OUT FALSE parport.0.pin-09-in
6 bit OUT FALSE parport.0.pin-09-in-not
6 bit OUT FALSE parport.0.pin-10-in
6 bit OUT FALSE parport.0.pin-10-in-not
6 bit OUT FALSE parport.0.pin-11-in
6 bit OUT FALSE parport.0.pin-11-in-not
6 bit OUT FALSE parport.0.pin-12-in
6 bit OUT FALSE parport.0.pin-12-in-not
6 bit OUT FALSE parport.0.pin-13-in
6 bit OUT FALSE parport.0.pin-13-in-not
6 bit IN FALSE parport.0.pin-14-out
6 bit OUT FALSE parport.0.pin-15-in
6 bit OUT FALSE parport.0.pin-15-in-not
6 bit IN FALSE parport.0.pin-16-out
6 bit IN FALSE parport.0.pin-17-out
6 s32 OUT 0 parport.0.read.time
6 s32 OUT 0 parport.0.reset.time
6 s32 OUT 0 parport.0.write.time
6 s32 OUT 0 parport.read-all.time
6 s32 OUT 0 parport.write-all.time
10 s32 OUT 0 thread1.time

I can’t help feeling that you are not even trying to understand the instructions I am giving.

sorry, if i've don't follow your indtruction, I'm french and for me to undrstand the english language + lthe linux instruction is not very easy

halcmd: addf parport.0.read
<stdin>: addf requires at least 2 arguments, 1 given

There was a clear clue that you had entered an invalid command, but instead of correcting it you just carried on.

All we are trying to do here is load the parallel port driver and see if it sees any inputs from the hardware.

Ok; I understood the message, that is missing an argument, but how i know what is missing, , i don't know linux., that's a reason I ask the forum to help me.

The required argument was "thread1" as I said originally.

It is worth reading the documentation:

linuxcnc.org/docs/2.7/html/index_fr.html

(Manuel de HAL)