LinuxCNC on Debian 10 Buster quick and easy install

The following link from your first post does not work--I want to try installing linux cnc this way but I cant download the first image. Help?
Jeff

--Download the non-free version of Debian as the free version has no proprietary drivers included and may result in non functioning hardware, from here
-
cdimage.debian.org/images/unofficial/non...-live+nonfree/amd64/

Link edited to point to 10.4.
Thank you for reporting that.
Regards,
Tom.

Im trying this route again and running into an issue. I follow the instructions exactly as they are shown.

plaz@plaz-pc:~$ uname -a
Linux plaz-pc 4.19.0-9-amd64 #1 SMP Debian 4.19.118-2 (2020-04-29) x86_64 GNU/Linux
plaz@plaz-pc:~$ cd downloads
bash: cd: downloads: No such file or directory
plaz@plaz-pc:~$ cd Downloads
plaz@plaz-pc:~/Downloads$ sudo gdebi python-gtksourceview2_2.10.1-3_amd64.deb
[sudo] password for plaz:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading state information... Done

Python bindings for the GtkSourceView widget
GtkSourceView is a text widget that extends the standard GTK+ 2.x text
widget GtkTextView. It improves GtkTextView by implementing syntax
highlighting and other features typical of a source editor.
.
This package contains the Python bindings for GtkSourceView, and allows
to write Python programs that use the GtkSourceView widget.
Do you want to install the software package? [y/N]:y
/usr/bin/gdebi:113: FutureWarning: Possible nested set at position 1
c = findall("[[(](\S+)/\S+[])]", msg)[0].lower()
(Reading database ... 310448 files and directories currently installed.)
Preparing to unpack python-gtksourceview2_2.10.1-3_amd64.deb ...
Unpacking python-gtksourceview2 (2.10.1-3) over (2.10.1-3) ...
Setting up python-gtksourceview2 (2.10.1-3) ...
plaz@plaz-pc:~/Downloads$ sudo gdebi linuxcnc-uspace_2.9.0~pre0.1456.gdb3a15891_amd64.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Failed to open the software package
The package might be corrupted or you are not allowed to open the file. Check the permissions of the file.
plaz@plaz-pc:~/Downloads$

I'm getting a 404 not found for the buildbot links

You should be able to right-click the link and save as.

Plasmaguy wrote: Failed to open the software package
The package might be corrupted or you are not allowed to open the file. Check the permissions of the file.
plaz@plaz-pc:~/Downloads$

Download that file again, it is corrupted or the download broke.

matthewsx wrote: I'm getting a 404 not found for the buildbot links

All working now.

I tried again several times and it fails.

Plasmaguy wrote: I tried again several times and it fails.

You have the wrong kernel installed,
I did several installations of this, it always works, always.
Can you please try one more time, and keep track of the steps so when you get stuck post that here.
Thank you.

How would the wrong kernel be installed when I follow your instructions exactly as they are set forth?
This is neither quick nor easy if it repeatedly gives corrupted files and others are also having problems getting your instructions here to work.

I tried on two different machines.