Debian 11/ Bullseye / MX Linux 21 - how to run a buildbot AND RIP install?

and to build debs, you need to add this repo in synaptic

deb-src buildbot.linuxcnc.org/ bullseye master-rtpreempt

this lets you get the linuxcnc language modules in my list

forum.linuxcnc.org/qtvcp/38414-installing-qtvcp

rodw wrote:

and to build debs, you need to add this repo in synaptic

deb-src buildbot.linuxcnc.org/ bullseye master-rtpreempt

this lets you get the linuxcnc language modules in my list
 

forum.linuxcnc.org/9-installing-linuxcnc...er-on-debian-9-error

rob@RobsCNC:~ Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key().
Executing: /tmp/apt-key-gpghome.LC3gdYkYcV/gpg.1.sh --keyserver keys.openpgp.org --recv-key EF1B07FEE0EE663E
gpg: key EF1B07FEE0EE663E: new key but contains no user ID - skipped
gpg: Total number processed: 1
gpg: w/o user IDs: 1
rob@RobsCNC:~ Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key().
Executing: /tmp/apt-key-gpghome.qmvUwevWal/gpg.1.sh --keyserver hkp://pgpkeys.eu --recv-key EF1B07FEE0EE663E
gpg: key EF1B07FEE0EE663E: public key "LinuxCNC Buildbot <nomail@linuxcnc.org>" imported
gpg: Total number processed: 1
gpg: imported: 1
rob@RobsCNC:~ Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key().
Executing: /tmp/apt-key-gpghome.46NCfPuusk/gpg.1.sh --keyserver hkp://keyserver.ubuntu.com --recv-key EF1B07FEE0EE663E
gpg: key EF1B07FEE0EE663E: "LinuxCNC Buildbot <nomail@linuxcnc.org>" not changed
gpg: Total number processed: 1
gpg: unchanged: 1

rodw wrote:

From the errors, looks like you missed a few dependencies. Did you open the spoiler in this post hat had them all in it?
forum.linuxcnc.org/38-general-linuxcnc-q...stall?start=0#217208

Just paste it in again, remove any it can't find so it runs. It will ignore anything not required.
 

Rod, from your list, you probably dont need these being gtk2 + a linuxcnc english doc

E: Unable to locate package linuxcnc-doc-en
E: Unable to locate package ibgtk2.0-dev
E: Couldn't find any package by glob 'ibgtk2.0-dev'

 

Just a couple of warnings with Gmoccapy and QTPlasmaC now (but both load, I'll add my configs and try them on a live machine tomorrow evening)

I'm going to try sheetcam too and see if that works (it was not happy yesterday with some GTK issues.... maybe it will play nice or run it via PlayOnLinux

It probably wouldn't hurt to add Debian11 in the title of this thread so as not to confuse folk who are using other linux distributions.
 

phillc54 wrote:

It probably wouldn't hurt to add Debian11 in the title of this thread so as not to confuse folk who are using other linux distributions.

 

If I am not mistaken you have to edit the first post tittle for it to stick.

robertspark wrote:

Rod, from your list, you probably dont need these being gtk2 + a linuxcnc english doc

E: Unable to locate package linuxcnc-doc-en
E: Unable to locate package ibgtk2.0-dev
E: Couldn't find any package by glob 'ibgtk2.0-dev'

Pherw, its been a big day! These were added so I could build the debs. Also not sure if yapps2 is required

phillc54 wrote:

It probably wouldn't hurt to add Debian11 in the title of this thread so as not to confuse folk who are using other linux distributions.

 

I had in mind to create a post about Debian 11 in the installing linuxcnc section thats a lot cleaner than this.
But robert has been very helpful here. I have to update my autologin based on his help.
Sounds like he got it sorted.