Locations of LinuxCNC

I just checked the armf 32bit dev and it's also 268kB so I guess the amd is bigger dunno. Anyway they are uploaded now.

JT

JT wrote:

I just checked the armf 32bit dev and it's also 268kB so I guess the amd is bigger dunno. Anyway they are uploaded now.

JT

In any case you can also check the .deb file using a program like 7-Zip ( www.7-zip.org/ ) with which you can see the content.

No meed for 7zip, the included archive manager can open deb file, right click and choose open with archive manager.

Yep, I use Gdebi to install debs.

JT

A zip file containing all LinuxCNC 2.8.4 .deb files for buster arm64 is available a this link

  linuxcnc-uspace_2.8.4_arm64.zip

The ready-made image is available here:
forum.linuxcnc.org/9-installing-linuxcnc...pi-4?start=70#261676
 

JT wrote:

The locations of LinuxCNC .deb files (deb is an abbreviation for Debian package) can be somewhat hard to find so here are all that I know of.

linuxcnc.org/dists/
buildbot.linuxcnc.org/dista/
buildbot2.highlab.com/

The most updated version of LinuxCNC 2.9 for Bookworm for all architectures are also available at this link:

packages.debian.org/search?keywords=linuxcnc-uspace

ftp.debian.org/debian/pool/main/l/linuxcnc/

Is there a decoder ring for all of the codenames?
I've got a Rasp Pi Zero. So, 32bit arm. Right? But, I can't find one of the distros that look like an obvious fit.

LinuxCNC cannot be installed on Rasp Pi Zero

Hi.
This Links don´t work  !!!
i need Install Linuxcnc 2.10 , where I see the .deb File ?

Thanks

At the moment these links are available:
(tested on Debian Bookworm)
linuxcnc-uspace_2.10.0~pre0_arm64.deb
linuxcnc-uspace-dev_2.10.0~pre0_arm64.deb 

buildbot.linuxcnc.org/dists/buster/master-rtpreempt/
It might complain about Python versions, though, i have not tested this in quite a while.