Locations of LinuxCNC

RobotMatic wrote:

Hi.
This Links don´t work  !!!
i need Install Linuxcnc 2.10 , where I see the .deb File ?

Thanks

At the moment these links are available:
(tested on Debian Bookworm)
linuxcnc-uspace_2.10.0~pre0_arm64.deb
linuxcnc-uspace-dev_2.10.0~pre0_arm64.deb 

You will have to build 2.10 from source on the pi. There is no buildbot I am aware of.

RobotMatic wrote:

Hi.
This Links don´t work  !!!
i need Install Linuxcnc 2.10 , where I see the .deb File ?

Thanks

At the moment these links are available:
(tested on Debian Bookworm)
linuxcnc-uspace_2.10.0~pre0_arm64.deb
linuxcnc-uspace-dev_2.10.0~pre0_arm64.deb 

The new .deb files, updated to 1 December 2023, can be found in the file linuxcnc_2.10.0~pre0_arm64.zip  at this link. 

linuxcnc_2.10.0~pre0_arm64.zip

This version works on both 
- Pi 4 ( forum.linuxcnc.org/9-installing-linuxcnc...-pi-5?start=0#285240 )
and 
- Pi 5 ( forum.linuxcnc.org/9-installing-linuxcnc...-pi-5?start=0#285243 )
with 
Raspberry Pi OS with desktop
Release date: October 10th 2023
System: 64-bit
Kernel version: 6.1
Debian version: 12 (bookworm)

Released debs (ie officially released 2.9 versions) are also now available from Github.

github.com/LinuxCNC/linuxcnc/releases

This covers Trixie and Sid and has both AMD64 and ARM64 packages.

It is not yet clear whether the buildbots will continue in the future, but at the moment they are how the docs get to the website.

The latest 2.97 version is also available in Debian Testing. The Debian Trixie release version includes 2.94 but it's a trivial 5 minute job to set up APT pinning to just get LinuxCNC from testing and everything else from Trixie as I show here:
forum.linuxcnc.org/9-installing-linuxcnc...97-and-later-forever
This will support any future LinuxCNC upgrades that are pushed to Debian