Edit Jog Buttons

Oops 2.8

Does that me I have to totally reinstall Linuxcnc?

You don't have to reinstall. just update.
How did you get linuxcnc?

Awesome!
Thanks for your help.
I Installed Stretch then used the buildbot.

I tried updating using the synaptic manager by hitting reload.
It downloaded new stuff I assume updates.
When I start GMOCCAPY now it still doesn't have A buttons.
Thanks for your help Chris,
Josh

It may take some time, until build of is updated.

I still can't get these jog buttons to appear.
Using version 2.8 with GMOCCAPY 3.0.8.2
Any suggestions?

Does anyone know how to add the A- and A+ jog buttons to Gmoccapy?

You are still using the old version.

If you do update you should get 3.1.3.XX

How have you installed your linuxcnc?

If synaptic does not show updates fot linuxcnc, may be you haven't set the sources correct.

Norbert

I am using Debian Stretch rt-preempt
When I try to upgrade with synaptic package manager I get this:Could not download all repository indexes

The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct.
GPG error: linuxcnc.org stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3CB9FD148F374FEFThe repository ' linuxcnc.org stretch InRelease' is not signed.

I am trying to follow these directions:
linuxcnc.org/docs/html/getting-started/updating-linuxcnc.html