Edit Jog Buttons

More
5 years 5 months ago #209481 by tommylight
Replied by tommylight on topic Edit Jog Buttons
That was a PyVCP panel added to the existing config, adding some files makes it work but only with AXIS GUI.
linuxcnc.org/docs/2.4/html/hal_pyvcp.html
linuxcnc.org/docs/2.4/html/hal_pyvcp_examples.html
Old links but they do work.

Please Log in to join the conversation.

More
5 years 5 months ago #209489 by bevins
Replied by bevins on topic Edit Jog Buttons

eighthaxis wrote: I do have the A jog buttons now and they work.
Is there any way to use Show HAL, HALScope, HALconfig while using GMOCCAPY or are the only usable from AXIS?


I think they are in the config screen.

Please Log in to join the conversation.

More
5 years 5 months ago #209513 by newbynobi
Replied by newbynobi on topic Edit Jog Buttons
Yes, the buttons to start halshow and friends are on the settings screen, Passwort = "123"

Attachment not found



Norbert

Please Log in to join the conversation.

More
5 years 5 months ago #209598 by eighthaxis
Replied by eighthaxis on topic Edit Jog Buttons
Do you think this panel could work with GMOCCAPY to allow for live servo tuning making the Tuning Process much easier?

forum.linuxcnc.org/10-advanced-configura...spindle-pid?start=10

Please Log in to join the conversation.

More
5 years 5 months ago #209611 by newbynobi
Replied by newbynobi on topic Edit Jog Buttons
It's includes,

Second button from the right in the image of my previous post.

Please Log in to join the conversation.

More
5 years 5 months ago #209614 by eighthaxis
Replied by eighthaxis on topic Edit Jog Buttons
I get that I am not talking about Halscope.
Its a live servo tuning adjustment panel.

Please Log in to join the conversation.

More
5 years 5 months ago #209656 by eighthaxis
Replied by eighthaxis on topic Edit Jog Buttons
Cool thanks Tommy
It looks like it's a handy panel.

Please Log in to join the conversation.

Time to create page: 0.080 seconds
Powered by Kunena Forum