Hi all, I am French, I apologize for the bad translation
I used the Axis interface a lot to get started with LinuxCNC.
Now I want to use Gmocappy. This interface is easily adaptable and the halpins are more numerous.
I am looking to reduce keyboard and mouse use in my workshop.
However, I have a problem with Gremlin which is responsible for tracing the theoretical path (program) and the tracing of the machining in progress.Indeed,
I like to display the limits of movements. This allows me to quickly check my program.
Attachment not found
In this example, I quickly see that my tool moves between -50 and +50 on the X axis.This matches my gcode program well.This works well as long as the X, Y, Z offsets of G54 are integers.
Here is an example where the offset on X is 35mm (integer number) for G54:
Attachment not found
The path (gcode program) of the tool remains unchanged and the path (machining in progress) is well superimposed.
Attachment not found
Here is an example where the offset on X is 35.9mm (digit with a decimal part) for G54:
Attachment not found
In this case, the path (gcode program) of the tool is offset by 0.9mm: it can be seen on the limits (Xmin = -50.9, Xmax = 49.1) and the path (processing in progress) is not superimposed .
Attachment not found
Attachment not found
Good news : Actual machining conforms to program and offset G54 The problem is : The display of the white trace and the limits is incorrect (shift of the decimal part of the offset).I have the impression that GREMLIN only receives the entire part of G54.Is this a known issue?Is this a configuration issue?
