G-Code error in ncam.ngc Near line 100 only Facing

Hello I get the following error when creating a plane surface:

G-Code error in ncam.ngc
Near line 100 of
/home/cnc/linuxcnc/nc_files/ncam.ngc
EOF in file:/home/cnc/linuxcnc/nc_files/ncam.ngc seeking o-word: o<select> from line: 99



I have already worked on the following thread:

forum.linuxcnc.org/nativecam/35500-issue...h-1st-simple-program

new knowledge, if I put the bold line:

(begin Facing)
(author : Fernand Veilleux)

o<facing_002_act> if [1]
o<select> CALL [42] [1] [0.000000] [#<_z>] [0]

o<facing> CALL [25.400000] [0.000000] [#42] [#42 + -0.762000] [1] [1]

o<facing_002_act> endif

(end Facing)

remove to:

(begin Facing)
(author : Fernand Veilleux)

o<facing_001_act> if [1]

o<facing> CALL [25.400000] [0.000000] [#42] [#42 + -0.762000] [1] [1]

o<facing_001_act> endif

(end Facing)




program works.
Does my taplate have an error?



is unfortunately not a solution.

ist da vileicht ein umlaut Buchstabe mit reingerutscht in den Namenswert
ncam nimmt nur utf-8

ok soeben überprüft:
es gibt im Programm nur den einen Umlaut unter der Zeile 20:
(Das ist eine eingebaute Sicherheit, um einen Einstich das Werkstück vermeiden zu helfen)
ich denke der Teil in Klammern ist nur ein Kommentar.
es wird die Zeile 99 moniert :
o<select> CALL [42] [1] [0.000000] [#<_z>] [0]

nun kann ich Plandrehen wenn als erstes Längsdrehe.

Hi
Sorry for the German as your Image showes GERMAN Readings i thaught to answer German
What version of Ncam is it and what version of Linuxcnc is it installed to

it seams there is a double O command in the output

oh sorry that was my mistake i put the google overseer on the side. The double O command is stored in the templates of Ferm. Should we ask him if that is so ok?

github.com/FernV/NativeCAM/blob/master/cfg/lathe/facing.cfg

Linuxcnc 2.9.0 pre

Nativecam Version:
from this Paht
forum.linuxcnc.org/nativecam/32891-use-n...eb-package-now#94274

@blue0cean How did you got it working?

I have still the same error when staring it stand alone:

Hallo Hansu,
lösche bitte mal das Standard Template und und erzeuge diese neu.
hier ist ein kleines Anwenderforum:
discord.com/channels/481172737981808671/763456622110179358

You mean ?

Unfortunately deleting this didn't solve it.

Hello i have the same problem. I just come from install lastest Linuxcnc 2.8.2 Rtai kernel with the Debian 10 Buster linuxcnc iso and when LInuxcnc and settings finish all  run very good So i want to test and install Nativecam with the apt methods with the trick of modify the repository from Buster to stretch in the apt source list... to be able to install on Buster (thanks to another users linuxcnc forums for this).

But but Nativecam run ...i can do about all the things in edit mode i was happy ..but when I try to output the ngc gcode to a file and try to load the ngc file on  Linuxcnc this is always failed to load with the EOF errors...o-word: o<select>.

Did someone have found the solving trick ? Many thanks have a nice days.