Another plasma component...

More
7 years 2 months ago #143143 by phillc54
Replied by phillc54 on topic Another plasma component...
If you run Configurator in upgrade mode it edits the machine Hal file and the ini file to create the pin.

Please Log in to join the conversation.

More
7 years 2 months ago #143158 by sevaz
Replied by sevaz on topic Another plasma component...
I compiled rip version from gitgub, but it is still incapable of using continues jogging.

Please Log in to join the conversation.

More
7 years 2 months ago #143160 by tommylight
Replied by tommylight on topic Another plasma component...
What are you min_limit and max_limit in the ini file of each axis/joint ?

Please Log in to join the conversation.

More
7 years 2 months ago #143165 by sevaz
Replied by sevaz on topic Another plasma component...
It doesn't work even on the test setup(sim) that comes with the plasmac. So continues jogging doesn't work but incremental jogging works just fine.

Please Log in to join the conversation.

More
7 years 2 months ago #143167 by tommylight
Replied by tommylight on topic Another plasma component...
Are you using a wireless keyboard ?

Please Log in to join the conversation.

More
7 years 2 months ago #143168 by sevaz
Replied by sevaz on topic Another plasma component...
No, im using a wired keyboard. When i start just a normal axis without plasmac addons it works fine.

Please Log in to join the conversation.

More
7 years 2 months ago #143169 by tommylight
Replied by tommylight on topic Another plasma component...
I have not tested new versions of PlasmaC for the last month, so i do not know what could be causing that.
You should really check what are the min_limit and max_limit for each axis in the ini file.

Please Log in to join the conversation.

More
7 years 2 months ago #143171 by sevaz
Replied by sevaz on topic Another plasma component...
Maybe i updated too early, so has caught some bugs. So i just deleted plasmac_axis.py and everything started to work like it should. But of course i lost all cool axis tweaks.

Please Log in to join the conversation.

More
7 years 2 months ago #143172 by rodw
Replied by rodw on topic Another plasma component...

phillc54 wrote: If you run Configurator in upgrade mode it edits the machine Hal file and the ini file to create the pin.


It didn't a few days ago when I ran the configurator. (after the 18th August update)

Please Log in to join the conversation.

More
7 years 2 months ago #143175 by phillc54
Replied by phillc54 on topic Another plasma component...

It didn't a few days ago when I ran the configurator. (after the 18th August update)

Yeah, I know :(

That was fixed a couple of days later.

I'll have a look at a custom hal file somewhere

Please Log in to join the conversation.

Time to create page: 0.343 seconds
Powered by Kunena Forum