Valid Arc Lost, Thcad 300 config & Plasmac override

More
6 years 6 months ago #162678 by taloot
Replied by taloot on topic Valid Arc Lost, Thcad 300 config & Plasmac override
you can use hypertherm torch body,, it cuts better than the P80 you have

Please Log in to join the conversation.

More
6 years 6 months ago #162702 by CNCFred
Replied by CNCFred on topic Valid Arc Lost, Thcad 300 config & Plasmac override
Is this plug and play.? That would be great they have a very fine torch tip as well.
Thx

Please Log in to join the conversation.

More
6 years 6 months ago #162791 by jay1st
Replied by jay1st on topic Valid Arc Lost, Thcad 300 config & Plasmac override
i have a P80 as well (chineesium cutter) and got some 1.1mm tips for fine cut.
but still messing around with the THC settings, and no steel sheets on hand to try out those fine tips

Please Log in to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum