1.2m x 0.6m plasma, <£2k questions!:

More
6 years 4 months ago #170143 by rodw
Replied by rodw on topic 1.2m x 0.6m plasma, <£2k questions!:

thefabricator03 wrote: It really is a industrial piece of hardware with more I/O that I can use on my large machine.


If you were to swap your large machine for my small machine you would have a perfect example on how to use almost every input and most outputs the 7i76e has on offer :)

Act quick, this offer won't last forever. Once I upgrade to my Lam drivers the deals off!

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170144 by WinstonTodge
Replied by WinstonTodge on topic 1.2m x 0.6m plasma, <£2k questions!:
I think I need to do a system block diagram and pin allocation, to work out what I need... :)

Ta!

C.

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
6 years 4 months ago - 6 years 4 months ago #170145 by thefabricator03
Replied by thefabricator03 on topic 1.2m x 0.6m plasma, <£2k questions!:
Have a look at my last post in this thread, I have attached my wiring diagram. It will give you a idea of where to start,

www.forum.linuxcnc.org/plasma-laser/3629...anel?start=40#148670
Last edit: 6 years 4 months ago by thefabricator03.

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
6 years 4 months ago #170146 by thefabricator03
Replied by thefabricator03 on topic 1.2m x 0.6m plasma, <£2k questions!:
Ha Ha, I would not trade my machine for the world! Nice try tho.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170148 by rodw
Replied by rodw on topic 1.2m x 0.6m plasma, <£2k questions!:
Try the attached PDF

Attachment 7i96_2020-06-04.jpg not found


Attachment 7i96ReferenceBuildPlasmaPinout_2020-06-04.pdf not found

Attachments:
The following user(s) said Thank You: Joco, thefabricator03, WinstonTodge

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #170149 by rodw
Replied by rodw on topic 1.2m x 0.6m plasma, <£2k questions!:

thefabricator03 wrote: Ha Ha, I would not trade my machine for the world! Nice try tho.


Every fabricator needs a spaceship I reckon!
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.301 seconds
Powered by Kunena Forum