PlasmaC Fiber laser 1Kw head height control + auto focuas

aslo i want 7i96 firmware with 3 pwmgen or if possable i want to swap pins between enc A and ENc B

I could replace all encoder pins with "A" pins of different encoders
as is done with the 7I96 plasma config

7I92 config for 5ABOB with extra PWMGens with all encoder pins
being "A" pins (so 6 encoders available for frequency measurement)

PCW wrote: 7I92 config for 5ABOB with extra PWMGens with all encoder pins
being "A" pins (so 6 encoders available for frequency measurement)

I was afraid to ask !
Thank you.

Would it be to much to ask for the 5i25/6i25 ?

PCW wrote:

Attachment not found

That was quick !
Thank you very much, as usual you are magnificent.

hello,
its been a while since last update,, but i will descried some of problems im working in now

advanced fast THC with very low tolerance
,multi stage piecing
without those 2 its impossible to achieve good cut and super tiny pricing hole

HI I interestedin the Laser But Do not know to much, can you share your configuration/recomendatio for
fiber laser power supply, laser head, in the 1000-1500W range
thanks.

taloot wrote:

hello,
its been a while since last update,, but i will descried some of problems im working in now

advanced fast THC with very low tolerance
,multi stage piecing
without those 2 its impossible to achieve

Attachment not found

good cut and super tiny pricing hole

Any new update on your project, I am a fiber laser user and have upgraded co2 laser machine to fiber but using china controller. I am very interested in your project. Can you give me your contact? I want to talk more.