Photos

More
6 years 6 months ago #165173 by phillc54
Photos was created by phillc54
A place to post photos of cuts you have achieved with PlasmaC.

Please Log in to join the conversation.

More
6 years 6 months ago #165189 by bbsr_5a
Replied by bbsr_5a on topic Photos
Thank you to all How made this Possible

Attachment not found

Please Log in to join the conversation.

More
6 years 6 months ago #165199 by taloot
Replied by taloot on topic Photos

Attachment not found

Attachment not found

Attachment not found

Attachment not found



last 2 picture done with special chinese plasma

Please Log in to join the conversation.

More
6 years 6 months ago #165201 by Clive S
Replied by Clive S on topic Photos

phillc54 wrote: A place to post photos of cuts you have achieved with PlasmaC.


It would be nice to have thickness and cut details as well :)

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 6 months ago #165217 by thefabricator03
Replied by thefabricator03 on topic Photos
This was todays work. 25mm plate.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 6 months ago #165219 by thefabricator03
Replied by thefabricator03 on topic Photos
I cut these for a project. They are decorative outriggers. Cut from 1.6 hot rolled sheet. I welded them and then ground them flush and had them powder coated.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 6 months ago #165220 by thefabricator03
Replied by thefabricator03 on topic Photos

Attachment not found

Please Log in to join the conversation.

More
6 years 6 months ago #165221 by tommylight
Replied by tommylight on topic Photos
@thefabricator03
Those are some nice cuts! :)
You do some really nice work.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
6 years 6 months ago #165222 by thefabricator03
Replied by thefabricator03 on topic Photos
Thanks Tom

Please Log in to join the conversation.

More
6 years 6 months ago #165224 by tommylight
Replied by tommylight on topic Photos
You are welcomed, always.

Please Log in to join the conversation.

Time to create page: 0.714 seconds
Powered by Kunena Forum