Vertical Axis GUI for PlasmaC ?

More
6 years 5 months ago #167024 by tommylight
Vertical Axis GUI for PlasmaC ? was created by tommylight
Anyone thought of using a vertical version of AXIS GUI for PlasmaC, if it was available ?
And how hard would it be to make one?

Please Log in to join the conversation.

More
6 years 5 months ago #167025 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
I haven't but I think it would be possible.

Any thoughts on the layout?

Please Log in to join the conversation.

More
6 years 5 months ago #167026 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?

phillc54 wrote:
Any thoughts on the layout?

Leme mock up something quick....

Please Log in to join the conversation.

More
6 years 5 months ago #167028 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?
Just a quick mock up to get an idea

Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #167029 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
I'll have a play around over the next few days and see what I can come up with.

Please Log in to join the conversation.

More
6 years 5 months ago #167031 by bbsr_5a
Replied by bbsr_5a on topic Vertical Axis GUI for PlasmaC ?
and this on a 22 inch TV Monitor
that graps the EMI on every ARC on

Please Log in to join the conversation.

More
6 years 5 months ago #167033 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?

bbsr_5a wrote: and this on a 22 inch TV Monitor
that graps the EMI on every ARC on

Nope, on 24 and 25" monitors, not tv, also i have a 32" HP with QHD resolution.
And i have no EMI and the ARC is cool ! :)

Please Log in to join the conversation.

More
6 years 5 months ago #167034 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?

phillc54 wrote: I'll have a play around over the next few days and see what I can come up with.

Nice, thank you.
Just as a side note, not a must have, just from experience when the monitor is mounted on the machine it interferes with putting material on the table, this way the footprint on the working side would be much smaller.

Please Log in to join the conversation.

More
6 years 5 months ago #167038 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
No worries Tom, I can't promise anything but it will be an interesting experiment.

Please Log in to join the conversation.

More
6 years 5 months ago #167115 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
A bit of progress, slowly streching it in the right direction.

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.475 seconds
Powered by Kunena Forum