Vertical Axis GUI for PlasmaC ?

Here is where its at.

1920x1080 with font size 14 which is the most that fits at this size.

1920x1200 with font size 14.

1920x1200 with font size 15.

Nive, nice, VERY NICE !
Magnificent work, thank you.
BTW, one thing i noticed while setting the Z axis limits yesterday, the "ignore limits" is not there ?!

tommylight wrote: Nive, nice, VERY NICE !
Magnificent work, thank you.

If you think it is OK, I can push it tomorrow and you can have a play and see what I got wrong or what may look better.

BTW, one thing i noticed while setting the Z axis limits yesterday, the "ignore limits" is not there ?!

Where does that normally live, I just opened a basic Axis sim and couldn't see it...

Under the homing section in Axis. It needs to have hardware limits set for it to show.

Ahh, that is why I have never seen it.

I will check it out tomorrow.

Another thing i noticed today while cutting air, lots of it, the cut distance is not the same as in file properties, there is quite a distance difference, see screenshot.

That is for the part below, it sure looks like over 58 meters, as 12 would be enough to go over the outline!

Not a deal breaker in any way shape or form. And BTW, notice the probe time ! :pinch:
Or is it just for what is done with the torch enabled ?
I have it disabled as i have no plasma source for now.
Thank you for everything.

Never mind the last post, a "duh" or just getting old. Or might be putting 15 to 19 hours days including Sundays is getting to me !
That was the job already done as i had it stop before finishing the job, so it is correctly counting the distance.
On a brighter side of things, i have it running for two days without a single hitch, cutting air.
I might just convince myself to build a plasma cutter source transformer thingy or modify two broken ones i have here, none repairable.
Geez, not enough time......

Yeah, the statistics are only what has occured up to now, there is no look ahead.

Sorry Phill, been jumpy lately, for such a quiet time in history i am having way to much to do and arrange and .......
Yeah, fun times having to think "did i touch the parts that i just got from town with the right or the left hand, oh well, wash everything !! ", by now i have 4 separate sections in the shop to quarantine stuff that "might be infected", etc etc.
All this is just a very small part of the day, but despite all, i am genuinely enjoying this time as i can work without distractions, i can take my time to clean and prepare stuff, even chamfering and de-burring has become obligatory for everything !
3AM, still working doing some scripting and testing for those quick and easy installs for Mint and Debian and Ubuntu.
...........zzzzzzzzzzzzzzzzz.....................

I just pushed this work. To enable portrait mode put the following in the [PLASMAC] section of the ini file:
I fixed the ignore limits thingy as well.