Vertical Axis GUI for PlasmaC ?

More
6 years 5 months ago #167116 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?
T2030 ????
Nice, thank you very much.
Also, damn, you are fast ! :)

Please Log in to join the conversation.

More
6 years 5 months ago #167117 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?

tommylight wrote: T2030 ????


From a pic I saw recently, or did I misread it?

Please Log in to join the conversation.

More
6 years 5 months ago #167118 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?

phillc54 wrote:

tommylight wrote: T2030 ????


From a pic I saw recently, or did I misread it?

That is correct !
But it is a bit difficult to read, so i was has happy to see it there. :)

Please Log in to join the conversation.

More
6 years 5 months ago #167121 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
@Tom,

What screen resolution would you look to use
this on?

Please Log in to join the conversation.

More
6 years 5 months ago #167122 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?
Full HD, or 1920X1080.
That would be usable for others also, all of the monitors i have do 1920X1200, but that is not standard.

Please Log in to join the conversation.

More
6 years 5 months ago #167123 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
From what I see here using portrait mode seems to be a more efficient use of space.
It does seem to be feasible, portrait mode is switched on with a parameter in the ini file.
Some more fiddling tomorrow and I should have a workable version for testing.

Please Log in to join the conversation.

More
6 years 5 months ago #167125 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?
Well i did not know portrait mode exists in Linuxcnc, so i've learned something new! :)
Thank you.

Please Log in to join the conversation.

More
6 years 5 months ago #167127 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
It didn't until you suggested it, but only for PlasmaC at this stage.

Please Log in to join the conversation.

More
6 years 5 months ago #167129 by tommylight
Replied by tommylight on topic Vertical Axis GUI for PlasmaC ?

phillc54 wrote: It didn't until you suggested it, but only for PlasmaC at this stage.

I was wondering how did i miss that ! Gee, happening often lately ! :)

Please Log in to join the conversation.

More
6 years 5 months ago #167132 by phillc54
Replied by phillc54 on topic Vertical Axis GUI for PlasmaC ?
It happens all the time for me now days. :(

Please Log in to join the conversation.

Time to create page: 0.055 seconds
Powered by Kunena Forum