QtPlasmaC release.

More
5 years 7 months ago #202803 by phillc54
Replied by phillc54 on topic QtPlasmaC release.

crowloy wrote: one thing missing from qtplasmac-setup is laser_on setup. Adding this to setup a pin definition will help future qtplasmac users I believe.

Oops, that is a bit of an oversight. :blush:
Thanks for the report.

Edit: fix has been pushed.

Please Log in to join the conversation.

More
5 years 7 months ago #202999 by crowloy
Replied by crowloy on topic QtPlasmaC release.
Another possible bug. I've been following along on the updates to qtplasma for awhile. Recently when I close down linuxcnc using the button on the upper right I get an error message from qtvcp. I've attached a picture of the error.

Attachment not found

Please Log in to join the conversation.

More
5 years 7 months ago #203036 by snowgoer540
Replied by snowgoer540 on topic QtPlasmaC release.
That seems to be a bug with qtvcp. Specifically the screen_options widget.

I am sure that Chris or Phill will be able to fix it pretty easily.

Please Log in to join the conversation.

More
5 years 7 months ago #203117 by snowgoer540
Replied by snowgoer540 on topic QtPlasmaC release.
You might have more success posting this error to the QTVCP section as it’s not a qtplasmac error.

Just be aware Chris hasn’t been as active lately due to work obligations. So may be a few until he chimes in.

Please Log in to join the conversation.

More
5 years 7 months ago #203875 by Franklin
Replied by Franklin on topic QtPlasmaC release.
Hi I am trying to use QtPlasmaC and in the conversational tab I keep getting the error message. I tried on two computers and get the same errors.

Attachment not found


Code:
Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/qtvcp/lib/qtplasmac/conv_rectangle.py", line 511, in <lambda> W[entry].editingFinished.connect(lambda:auto_preview(P, W)) File "/usr/lib/python2.7/dist-packages/qtvcp/lib/qtplasmac/conv_rectangle.py", line 404, in auto_preview preview(P, W) File "/usr/lib/python2.7/dist-packages/qtvcp/lib/qtplasmac/conv_rectangle.py", line 110, in preview kOffset = float(W.kerf_width.text()) * W.kOffset.isChecked() / 2 ValueError: invalid literal for float(): 1,00

Please Log in to join the conversation.

More
5 years 7 months ago #203876 by phillc54
Replied by phillc54 on topic QtPlasmaC release.
What is the value of the kerf width for the default material?

Please Log in to join the conversation.

More
5 years 7 months ago #203880 by Franklin
Replied by Franklin on topic QtPlasmaC release.
the default was 1, I tried different values, and created new materials. The result is the same.
I am using LinuxCNC 2.8.0 Debian 10 Buster PREEMPT-RT ISO
and updated to the master.

Please Log in to join the conversation.

More
5 years 7 months ago #203881 by phillc54
Replied by phillc54 on topic QtPlasmaC release.
After looking a bit closer it may be a locale issue, I see 1,00 and it is probably expecting 1.00

I will have a look at this tomorrow.

Please Log in to join the conversation.

More
5 years 7 months ago #203884 by Franklin
Replied by Franklin on topic QtPlasmaC release.
I also noticed that the "kerf offset" button is only active in the "greating circle" and "greating bolt circle" tabs, in other tabs the "kerf offset" button does not respond when pressed.
When in the settings I enter any value in the In the input box '"lead in" and save it, the "kerf offset" button becomes active in all tabs

Please Log in to join the conversation.

More
5 years 7 months ago #203886 by phillc54
Replied by phillc54 on topic QtPlasmaC release.
That is correct, in all the shapes except circle and bolt circle the offset is done with G41.1 or G42.1 both of which require a lead in.

Please Log in to join the conversation.

Time to create page: 0.258 seconds
Powered by Kunena Forum