Plasmac 758 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
Raspberry Pi4 Hal configuration for torch on Category: Plasmac Topic started 6 years 4 months ago, by greekart Last Post 6 years 4 months ago by greekart 1 2	Replies:11 Views:4223	Last Post by greekart 6 years 4 months ago
THC not showing on screen Category: Plasmac Topic started 6 years 4 months ago, by Nate Last Post 6 years 4 months ago by tommylight 1 2	Replies:14 Views:3975	Last Post by tommylight 6 years 4 months ago
setting up thcad Category: Plasmac Topic started 6 years 5 months ago, by Aaron3309 Last Post 6 years 4 months ago by PCW 1 2 3 4	Replies:36 Views:7729	Last Post by PCW 6 years 4 months ago
I don't have an Arc OK Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by KaleD 1 2	Replies:15 Views:5377	Last Post by KaleD 6 years 4 months ago
Probe or Arc problem Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by phillc54	Replies:1 Views:1249	Last Post by phillc54 6 years 4 months ago
PlasmaC questions new setup Category: Plasmac Topic started 6 years 5 months ago, by Clive S Last Post 6 years 4 months ago by Clive S 1 2 3 ... 14	Replies:133 Views:21.1k	Last Post by Clive S 6 years 4 months ago
Z axis height at end of cut Category: Plasmac Topic started 6 years 4 months ago, by rodw Last Post 6 years 4 months ago by tommylight 1 2 3 ... 5	Replies:49 Views:9820	Last Post by tommylight 6 years 4 months ago
Probe Z trouble Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by phillc54	Replies:5 Views:1549	Last Post by phillc54 6 years 4 months ago
plasmac install error Category: Plasmac Topic started 6 years 5 months ago, by Nate Last Post 6 years 4 months ago by tommylight 1 2	Replies:16 Views:4395	Last Post by tommylight 6 years 4 months ago
Feature update required. Category: Plasmac Topic started 6 years 4 months ago, by rodw Last Post 6 years 4 months ago by phillc54 1 2 3	Replies:26 Views:5162	Last Post by phillc54 6 years 4 months ago
Float Switch Activated Category: Plasmac Topic started 6 years 4 months ago, by little_sparky Last Post 6 years 4 months ago by phillc54	Replies:6 Views:1602	Last Post by phillc54 6 years 4 months ago
Watchdog has bit! Category: Plasmac Topic started 6 years 4 months ago, by little_sparky Last Post 6 years 4 months ago by PCW 1 2	Replies:19 Views:5129	Last Post by PCW 6 years 4 months ago
using Sheetcam and PlasmaC re Kerf Category: Plasmac Topic started 6 years 4 months ago, by Clive S Last Post 6 years 4 months ago by phillc54 1 2	Replies:12 Views:4197	Last Post by phillc54 6 years 4 months ago
Running CNC Plasma off generator Category: Plasmac Topic started 6 years 4 months ago, by little_sparky Last Post 6 years 4 months ago by bbsr_5a 1 2	Replies:14 Views:4510	Last Post by bbsr_5a 6 years 4 months ago
THCAD-10 Jumper Settings Category: Plasmac Topic started 6 years 4 months ago, by little_sparky Last Post 6 years 4 months ago by little_sparky	Replies:2 Views:1315	Last Post by little_sparky 6 years 4 months ago
2.8 or 2.9 Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by phillc54	Replies:4 Views:1499	Last Post by phillc54 6 years 4 months ago
Plasmac Configurator Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by KaleD 1 2 3	Replies:23 Views:4858	Last Post by KaleD 6 years 4 months ago
Using Plasmac to draw with a marker Category: Plasmac Topic started 6 years 8 months ago, by snowgoer540 Last Post 6 years 4 months ago by phillc54 1 2	Replies:14 Views:3926	Last Post by phillc54 6 years 4 months ago
Pin '10' does not exist Category: Plasmac Topic started 6 years 4 months ago, by KaleD Last Post 6 years 4 months ago by tommylight	Replies:7 Views:2170	Last Post by tommylight 6 years 4 months ago
Rounded corners Category: Plasmac Topic started 6 years 4 months ago, by Shanester25 Last Post 6 years 4 months ago by Todd Zuercher	Replies:1 Views:1366	Last Post by Todd Zuercher 6 years 4 months ago

Time to create page: 0.332 seconds