Sample Qtvcp Screens

Persei, your gui looks awesome, offten i open it and just stare at it.
Due to some reasons i allways use Axis Gui, mostly for it's simplicity.
I must find a reason to use this, soon.
Thank you.
Tom.

persei8 wrote: I have a new and improved version of QtDragon. It's not just a sample screen, but a fully functional GUI for 3 or 4 axes, VFD control, and probing. If you are interested in updating the current one, I will put together a package.
Jim

Yes of course. I'm working long hours till the weekend then I can get back to following up some bugs and if you are ready update qtdragon!

Hi Jim,
Please, post link to the updated QtDragon version.
Thank you ...

I hope this works, Never used dropbox before.
www.dropbox.com/sh/348e4qenyyow2vl/AACRe...rSWlptHaO-sYDPa?dl=0

Hello Jim,

Thank you for your screen !

Can you make step by step guide how to install it. If possible plase start with which ISO file LinuxCNC ( add link ) do you use .. and then where you put your screen files ... and how to use it ...

Have a nice day,

Emil

If you can wait a bit - I should have the new version included with linuxcnc hopefully this weekend.

Chris

Hello Emil, glad you like it. The best way to get it is to wait for Chris to integrate it into the sample screens and then you can select it from the LinuxCNC configuration selector and run in a simulation mode. From there, you could move it to your config directory and add your customizations. ie. HAL files, ini etc. I'll be happy to try and help with any operational issues.
Jim

It works !
It looks awesome. Thank you.

persei8 wrote: I have a new and improved version of QtDragon. It's not just a sample screen, but a fully functional GUI for 3 or 4 axes, VFD control, and probing. If you are interested in updating the current one, I will put together a package.
Jim

Awesome screen Jim. Would you mind if I used it as a basis for a dedicated plasma cutter screen.

Cheers, Phill.

Certainly not. I'm glad you find it useful. Let me know if I can be of assistance although I don't know anything about plasma screens.