Sample Qtvcp Screens

tommylight wrote:

Clive S wrote: .
Is this in 2.9.. if not is it possible to to install in 2.9. Thanks for the hard work.

Yes it is.

Ok I did a sudo update and upgrade. Now I can find it but it errors with:-

That is the Debian Stretch version, it has no QT5 installed,
www.qtpyvcp.com/install/quick_start.html

Another modification of QtDragon for Full HD monitors. Size 1900x1000.

Very nice, thank you.

Three modifications of the QtDragon interface with improved functionality. Request for specialists to give
recommendations for improvement. Unzip files into ~ / linuxcnc / configs and run. Edit 27/05/2020-download.

I think it will be best if you just describe each issue along with what it is you would like. I'm not going to install a whole new configuration.

persei8 wrote: I think it will be best if you just describe each issue along with what it is you would like. I'm not going to install a whole new configuration.

Thank you for your attention and for your hard work!
Your interface works and it’s enough for me without any problems. This is for forum readers like me. Maybe someone will do it to themselves. You do not need to redo anything and so perfectly.

Any particular reason why you have the resolution set at 1900x1000 ?
Just seems a bit strange and leave empty spaces on a 1920X1080 monitor,

I leave room for system panels. Thank you for the attention!

hottabich wrote: I leave room for system panels. Thank you for the attention!

You are welcomed, and i am sorry for that, forgot i use 1920X1200 on all 5 monitors so i had plenty of space left.