Sample Qtvcp Screens

ForTommylight QtDragon + CamView. Probe help in images, images in configs sim.qtdragon.
Thank you so much Jim!

hottabich wrote: ForTommylight QtDragon + CamView. Probe help in images, images in configs sim.qtdragon.
Thank you so much Jim!

Thank you very much, it works.
Now i found a 20 year old camera so i will try to make that work.

The glcanon you posted has weird indentation so won't run and makes it difficult to find what you changed.

cmorley wrote: The glcanon you posted has weird indentation so won't run and makes it difficult to find what you changed.

Thanks for your attention. I found the source of the file and the picture. .

I had a hardrive die so lost the chuck/stock work.
Looking at the sample glcanon you posted - looks like they use magic comments to define the stock size.
There are also HAL pins used for something...
Too bad the comments aren't in English (or that I could read Russian)

cmorley wrote: I had a hardrive die so lost the chuck/stock work.
Looking at the sample glcanon you posted - looks like they use magic comments to define the stock size.
There are also HAL pins used for something...
Too bad the comments aren't in English (or that I could read Russian)

Anybody can read Russian these days
translate.google.com/

yes that's what i did - it's a pain for one word comments all over the place.

I did get it to work mostly:


The HAL pins seem to change the blank size - not sure if that is adjusting after the fact or to show the blank get smaller as it cuts -probably the former.

The blank can also show Id (as in the pic)

cmorley wrote: I had a hardrive die so lost the chuck/stock work.
Looking at the sample glcanon you posted - looks like they use magic comments to define the stock size.
There are also HAL pins used for something...
Too bad the comments aren't in English (or that I could read Russian)

Thanks for the work you've done.
I don't know Python, so no comment. My condolences read using google translate. Here is an entertaining video, impressive.

yes I'd like to have the code for that program!

Here is a comment to the video"inserted" the editor into Axis as a widget ...
I took a drawing from a textbook to one of the industrial stands ...
(by the way - I remembered - somewhere they discussed what to store the LCD, the drawing, what kind of "technical maps" would beconvenient in one place, and so that it is convenient to view ...
kmk when you draw in a similar editor from a drawing it is very convenient - quickly peep)) and as I understand it
based on this file. Here's another: