Sample Qtvcp Screens

I have a mistake. Changed qt_pstat opened. And also an error at closing. When you put the files from the archive above into the configuration folder and into usr/share/qtvcp/screens/woodpecker everything works as it should. Thank you!

You don;t have the current fixes yet. maybe the buildbot is slow.

I update via synaptic. We just have a big time difference. You are not using the latest ui. and handler. Please replace from the archive. A button and an about page will be added to the interface, you can create any html help files. And add the woodpecker hd folder by analogy with dragon hd? Thanks for your work.

Updated, started. Screenshots before and after file replacement.

I used the files you posted originally.
I have to make changes to incorporate this into linuxcnc.
Please make sure the files you give me are ready to be included as I don't want to do work twice as just posting a new file doesn't show me what you changed - I have to start over again.

If you wish to continuously update woodpecker then I would suggest using github to clone linuxcnc and then you can make pull requests.

So please post the latest file here again and I will try again.

Thanks
Chris

Sorry for the inconvenience. Here are the latest files. As for github, I'll try to figure it out if circumstances permit. Thank you!

Download the QtDragon_hd interface from the link github.com/persei802 . Rename to QtWoodpecker_master_f replace the corresponding files with files from the archive and you can test. Format 1280x1024.

Slightly tweaked the interface sim.qtvcp_screens.industrial_lathe_wear(vertical ).

  The link is available for 30 days.

If anyone is interested in adding files with replacement from the Files.zip archive to the QtDragon_hd-master_2 folder. You will get full hd on 5 axes. Slightly corrected, please download a new archive.