Sample Qtvcp Screens

More
4 years 2 days ago #255322 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Woodpecker_(1280x1024_5axis).

Please Log in to join the conversation.

More
3 years 11 months ago #256454 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
QtWoodpecker_hd-master-(5axis)

Please Log in to join the conversation.

More
3 years 10 months ago #258877 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Trial file on github. Place the file at: linuxcnc/configs and test. There will be more. github.com/chottabich

Please Log in to join the conversation.

More
3 years 10 months ago #259565 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
 Meet QtWoodpecker_1024x768 and five more options. The files are available on Git Hub at the link in the previous post.

Please Log in to join the conversation.

More
3 years 9 months ago #261254 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Woodpecker (1600x900...1200) is already available on GitHub. Link above post.

Please Log in to join the conversation.

More
3 years 9 months ago #262736 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
github.com/chottabich?tab=repositories  
All repositories have been updated.

Please Log in to join the conversation.

More
3 years 9 months ago #262761 by rodw
Replied by rodw on topic Sample Qtvcp Screens
When I instlaled woodpecker 1536 x 868 the other day, I got no styles.
now I get the screen formatted way bigger than the physical screen, even if I changed the display to full hd
I deleted prefs and var files,
But its now styled but still oversized
Any ideas?

 

Attachment not found

Please Log in to join the conversation.

More
3 years 9 months ago #262764 by rodw
Replied by rodw on topic Sample Qtvcp Screens
recloned from scratch and updated the prefs file to use my home folder. The styles are now OK but its still oversized...

Please Log in to join the conversation.

More
3 years 9 months ago #262770 by hottabich
Replied by hottabich on topic Sample Qtvcp Screens
Unzip the archive to the linuxcnc/configs folder. Place style files and woodpecker.qrc with replacement at usr/share/qtvcp/screen/woodpecker, you will be able to switch styles from settings tab. The size changes to F10(min), F11(max). In the woodpecker_xyza.ini file, remove -f from the DISPLAY section.

Please Log in to join the conversation.

More
3 years 9 months ago #263039 by cmorley
Replied by cmorley on topic Sample Qtvcp Screens
I modified qtdragon to add a qsplitter (the white line) between the gcode display and the gcode plotter.
You can adjust the split to some degree or completely pick one or the other.

If someone wants to test I can post the file.
I think it might be good enough to make standard - opinions?

 

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.296 seconds
Powered by Kunena Forum