Error in tool_offsetview.py

This is what you say, every time I specify a configuration via Pncconf, I have to manually add these 3 lines.

I'm sending qtdragon.ui with the layout corrected, it should work fine

 

I committed your changes to qtdragon.
I also added the MDI commands to pncconf for qtdragon.

Thank you very much

widened the step timing spinbox in pncconf.
Let me know if that's better.

The problem with MDI entries has been resolved, it works fine.

In pncconf is ok in some places, but unchanged in some places.
 

Coming back to the topic of disabling some buttons in qtdragon during work, I have the code ready.
This would solve some other bugs. I can send it.

Ok improved pncconf's test/tune dialog.

Sure I would like to look at your changes.

I am uploading a handler with changes to the buttons behavior. There is still the "pause" and "step" buttons to be made, they turn on the reset buttons and the "wcs" button, but I don't know where to change this behavior.
 

action_button.py is where most enable/disable behavior is defined.

I fixed a bug that caused "lbl_max_rapid" values to change after changing the "feedrate_override_slider". I guess introduced a bug in previous changes, but it works fine now. I changed some metric value fields to a consistent look, and a few minor changes to better fit the layout ._It seems to me that there is a problem with the function "def metric_system_changed (self, mode):" The value of mode is always True, regardless of whether in the LINEAR _UNITS ini file is metric or inch, and this is probably the reason for wrong values in "status_jog_linear" and in " lbl_jog_linear ". The problem is if the units are inch, if mm is fine.Could you please check why this is happening?

metric_system_changed() responds to metric mode (G20/21) regardless of machine unit base.

INFO.MACHINE_IS_METRIC will tell you if the INI is metric or imperial based.

yes, there are two bugs in the previous files i posted. I will fix it and ship it