Error in tool_offsetview.py

Hello! Please tell me how to add a tool image to the tool_offsetview .py widget. As well as switching the image through the tool selection dialog. Thank you!

this is just experimental fun but it works pretty well. Chris once mentioned that he wanted to add tool image options. Chris will do it right.
I did it like this:
For the pictures to be displayed in the tools of the tool_offsetview.py in the file tool_offsetview.py, make such a change
, do the image files in the directory: 
in the qtdragon.ui file, you need to enlarge the space for the tool image  

In order for the images to update in the preview, you need to add such entries in the qtdragon_handler.py file
   

unfortunately the second set of vertical images in the catalog 

Thank you very much for your attention and help! Here is my version of qtdragon, you may be interested.

Switching the tool with the command M61 or Reload Tool changes the image of the tool, but not through the dialog. Who knows how to fix it please tell me. Thank you!

use the STATUS message 'tool-in-spindle-changed' to call a function, to change the image.

Sorry, but I don't understand how to implement this. Thank you!

In the handler file something like this:

Thank you so much! Works great. I spread the handler with changes for my previous files.

not much is happening, so I made some minor adjustments in the setup tab, because the buttons didn't look right.  Two other problems:1. With manual movements of the A axis, the "fast/slow" switch does not toggle the value.2. In the "setup" tab, the link to local files in lcnc installed in the virtual machine works normally, but on a normal computer this link does not work for me, I cannot find the reason. Does it do the same for you?
Marek

The problem with the "fast / slow" switch fixed, I am sending an updated .ui file

Marek

To switch in the designer, you need to add a signal slot or an attached file. linuxcnc installed in  computer.