Profile for getyers

Offline
  • User Type: User
  • Rank: New Member New Member
  • Register Date: 02 May 2019
  • Last login: 6 years 3 months ago
  • Time Zone: UTC +0:00
  • Local Time: 11:06
  • Posts: 19
  • Profile views: 3
  • Gender: Unknown
  • Birthdate: Unknown


getyers recent posts (19 messages )

Subject Replies / Views Last Post
Category: General LinuxCNC Questions
Topic started 6 years 3 months ago, by getyers
Last Post 6 years 3 months ago
by tommylight
Replies:1
Views:1021
Last Post by tommylight
6 years 3 months ago
Category: General LinuxCNC Questions
Topic started 6 years 3 months ago, by getyers
Last Post 6 years 3 months ago
by rodw
Replies:2
Views:920
Last Post by rodw
6 years 3 months ago
Category: General LinuxCNC Questions
Topic started 6 years 6 months ago, by getyers
Last Post 6 years 6 months ago
by rodw
Replies:2
Views:975
Last Post by rodw
6 years 6 months ago
Category: Installing LinuxCNC
Topic started 6 years 8 months ago, by BeagleBrainz
Last Post 5 years 5 months ago
by Arthur_L
Replies:240
Views:65.4k
Last Post by Arthur_L
5 years 5 months ago
Category: General LinuxCNC Questions
Topic started 6 years 6 months ago, by getyers
Last Post 3 years 5 months ago
by tommylight
Replies:2
Views:1433
Last Post by tommylight
3 years 5 months ago
Category: Plasmac
Topic started 6 years 6 months ago, by getyers
Last Post 6 years 6 months ago
by tommylight
Replies:1
Views:1363
Last Post by tommylight
6 years 6 months ago
Category: General LinuxCNC Questions
Topic started 6 years 7 months ago, by getyers
Last Post 6 years 7 months ago
by BeagleBrainz
Replies:3
Views:1115
Last Post by BeagleBrainz
6 years 7 months ago
Category: General LinuxCNC Questions
Topic started 6 years 7 months ago, by getyers
Last Post 6 years 7 months ago
by BeagleBrainz
Replies:1
Views:954
Last Post by BeagleBrainz
6 years 7 months ago
Category: General LinuxCNC Questions
Topic started 6 years 9 months ago, by getyers
Last Post 6 years 9 months ago
by andypugh
Replies:2
Views:1121
Last Post by andypugh
6 years 9 months ago
thc
Category: General LinuxCNC Questions
Topic started 7 years 2 months ago, by getyers
Last Post 7 years 2 months ago
by rodw
Replies:5
Views:1865
Last Post by rodw
7 years 2 months ago
Time to create page: 0.226 seconds
Powered by Kunena Forum