Mastercam For Solidworks
07 Dec 2021 18:49 #228560
by Mar1
Mastercam For Solidworks was created by Mar1
Hi, what PP do you think will work with Mastercam for SolidWorks if anyone has a suggestion, Thanks.
Please Log in or Create an account to join the conversation.
- hermann1976
-
- Offline
- Senior Member
-
Less
More
- Posts: 45
- Thank you received: 13
19 Dec 2021 19:41 #229505
by hermann1976
Replied by hermann1976 on topic Mastercam For Solidworks
Please Log in or Create an account to join the conversation.
19 Dec 2021 22:15 #229514
by cakeslob
Replied by cakeslob on topic Mastercam For Solidworks
I took the x9 post from the wiki link based on MPFAN post, then I just ran it through the update script for mc2022. You might need to remove a axis but I dont remember. There doesnt seem too much different in the lcnc post from the default posts available from mastercam. mastercam keeps their postprocessor info close to the vest and docs/data are distributed through their distributors only and not through mastercam it self, they are pretty uppity about their post stuff....
Please Log in or Create an account to join the conversation.
Moderators: Skullworks
Time to create page: 0.135 seconds