Workpiece Preview

More
17 Oct 2020 16:59 #186373 by Stema
Workpiece Preview was created by Stema
Hi guys, new on Linuxcnc, have been using GRBL for a few years and thought i should give Linuxcnc a try.
I installed a new LinuxCNC 2.8.0 Debian 10 and I also installed NativeCam 0.1.14b. on a 3-4 year old Dell computer.
I have setting for a 3 axis mill and everything seems to be working fine except I do not see my workpiece in the preview window, everything else is visible there, such as drill and facing and other jobs and my machine limits, but my workpiece does not show up there no matter how I try.
Something I missed during installation or what am I doing wrong?

/Stema

Please Log in or Create an account to join the conversation.

More
19 Oct 2020 17:36 #186597 by Stema
Replied by Stema on topic Workpiece Preview
I figured it out, "Toggle skip lines icon" :)

/Stema

Please Log in or Create an account to join the conversation.

Time to create page: 0.061 seconds
Powered by Kunena Forum