Playing around with Pathpilot GUI
- snowgoer540
-
- Offline
- Moderator
-
Less
More
- Posts: 2388
- Thank you received: 779
16 Mar 2020 23:43 #160488
by snowgoer540
Any ideas on how you would change Max Vel to Max Rapid? I've got about as far as the versions and errors with Glade in the past when I looked into it.
Max Vel is really not what one wants here... Especially for lathes.
Replied by snowgoer540 on topic Playing around with Pathpilot GUI
tormach used glade 2.16 to design the gui and have it as a required.
I opened it in 3.0 and changed the required to 3 that got rid of that error
the gtksourceview is because a few files are not where they are expected to be.
i've got a note somewhere on this I'd have to find for what the fix is
Any ideas on how you would change Max Vel to Max Rapid? I've got about as far as the versions and errors with Glade in the past when I looked into it.
Max Vel is really not what one wants here... Especially for lathes.
Please Log in or Create an account to join the conversation.
17 Mar 2020 20:46 #160592
by acmethod
Replied by acmethod on topic Playing around with Pathpilot GUI
Yeah i can get past the errors as well, but if i save the file using glade +gtk 3. The GUI will not load on boot, stalling at the 'Error starting PathPilot' screen.
I'm not familiar with the structure of the code, but I'm slowly getting a better understanding. Any help would be greatly appreciated.
I'm not familiar with the structure of the code, but I'm slowly getting a better understanding. Any help would be greatly appreciated.
Please Log in or Create an account to join the conversation.
Moderators: cncbasher
Time to create page: 0.081 seconds