My Cuts are kinda crap

More
02 Oct 2020 23:51 #184653 by Aldenflorio
Replied by Aldenflorio on topic My Cuts are kinda crap
Ok I’ll look into it

Please Log in or Create an account to join the conversation.

More
05 Oct 2020 13:06 #184963 by dvn4life1972
Replied by dvn4life1972 on topic My Cuts are kinda crap
Is the side of the part in your picture the back side or the top? It really doesn't look bad at all for a Titanium plasma, probably just need to tweak the programming for the cut. I would cut a few more out and not worry about wasting material, as the part is small and now is the time to figure out these things rather than later - consider it part of the cost of finishing your machine out.
The following user(s) said Thank You: Aldenflorio

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 03:07 #185196 by Aldenflorio
Replied by Aldenflorio on topic My Cuts are kinda crap
I checked out sheetcam. It’s everything I wanted, thank you so much. I made some other parts and it made them much nicer. Again thank you. I do have one question though:

I can’t seem to find the answer, do I have to pay for sheetcam once, or do I have to renew (pay again) it every year?
The following user(s) said Thank You: thefabricator03, dvn4life1972

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 03:41 #185205 by thefabricator03
One time payment. Its very well priced for what you can do with it.
The following user(s) said Thank You: Aldenflorio

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 10:24 #185224 by rodw
Replied by rodw on topic My Cuts are kinda crap
You are also permitted to use your license on a Windows box and your Linuxcnc box

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 10:29 #185226 by Aldenflorio
Replied by Aldenflorio on topic My Cuts are kinda crap
I’m not a fan of renewal payments. So this is a very nice thing. Sheetcam is definitely worth it.

I’m not sure what boxes are in the nature rodw speaks of them

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 10:32 #185227 by thefabricator03
He means computer,

I am not a fan either of renewal payments. I am still using AutoCAD 2015 because the new versions are now on a per year subscription basis.

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 10:38 #185228 by Aldenflorio
Replied by Aldenflorio on topic My Cuts are kinda crap
Oh ok. Thank you. Yeah companies are constantly moving in on annually or monthly payments. It typically mean we spend much more

Please Log in or Create an account to join the conversation.

More
07 Oct 2020 12:35 #185238 by dvn4life1972
Replied by dvn4life1972 on topic My Cuts are kinda crap
Sheetcam license is a extremely good value, worth every bit spent for the license and then some. It just works so well too.
The following user(s) said Thank You: Aldenflorio

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.387 seconds
Powered by Kunena Forum