1. User Interfaces
  3. Plasmac
  5. QtPlasmac Updates

QtPlasmac Updates

  • phillc54
  • phillc54's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
19 Jan 2022 03:37 - 06 Sep 2024 17:42 #232393 by phillc54
QtPlasmac Updates was created by phillc54
All QtPlasmaC and plasmac2 udpates will be announced in this thread.
It is recommended that users of any of these configurations subscribe to this thread.

QtPlasmaC 2.9 branch update list

QtPlasmaC master branch update list

plasmac2 master branch update list

The 2.8 branch PlasmaC configs are end of life and are unmaintained.
As of August 21, 2024, the 2.9 branch QtPlasmaC configs are now unmaintained.
Last edit: 06 Sep 2024 17:42 by snowgoer540.
The topic has been locked.
More
26 Jul 2025 00:10 - 26 Jul 2025 01:33 #332342 by snowgoer540
Replied by snowgoer540 on topic QtPlasmac Updates
QtPlasmaC updates - Master (v2.10):
  • "VEL:" label now indicates active velocity reduction and shows commanded feed rate percentage
  • suppress gcode filter warnings when material feed rate is 0
  • prevent material selector from opening when velocity label or indicator is clicked (when a program is running)
  • allow velocity reduction between 1-100, fix documentation inconsistency
Last edit: 26 Jul 2025 01:33 by snowgoer540.
The following user(s) said Thank You: tommylight
The topic has been locked.
More
28 Jul 2025 19:34 #332495 by snowgoer540
Replied by snowgoer540 on topic QtPlasmac Updates
QtPlasmaC updates - Master (v2.10):
  • enhance cutcritical dialog with checkboxes for each untoggled button
The topic has been locked.
More
08 Aug 2025 00:41 - 08 Aug 2025 00:42 #333025 by snowgoer540
Replied by snowgoer540 on topic QtPlasmac Updates
QtPlasmaC updates - Master (v2.10):
  • add M52P1 to conversational pre and postamble
Last edit: 08 Aug 2025 00:42 by snowgoer540.
The topic has been locked.
Moderators: snowgoer540
  1. User Interfaces
  3. Plasmac
  5. QtPlasmac Updates
Time to create page: 0.102 seconds
Powered by Kunena Forum