PlasmaC doesn't seem to use M190 material call in Gcode

6 years 1 month ago #184235 by phillc54

Replied by phillc54 on topic PlasmaC doesn't seem to use M190 material call in Gcode

I pushed an update so now the G-Code filter changes the material if it sees a material change so that should fix the radius error.

Please Log in or Create an account to join the conversation.

6 years 4 weeks ago #184659 by turbodude

Replied by turbodude on topic PlasmaC doesn't seem to use M190 material call in Gcode

Awesome, thanks Phil.

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540

Time to create page: 0.096 seconds